Cart
E-Flo Dci 4-Ball
E-Flo DCi 4-ball electric pump, 1000cc, 3 HP, 380-480 VAC 3 phase, SST Ultralife lower, Tri-Clamp, SiNi, stand
Part Number: YB6291
Image is for illustrative purposes only.
E-Flo Dci 4-Ball
E-Flo DCi 4-ball electric pump, 1000cc, 3 HP, 380-480 VAC 3 phase, SST Ultralife lower, Tri-Clamp, SiNi, stand
Part Number: YB6291
The direct current (DC) circulation pump with intelligent (i) control drive efficiency and sustainability in high volume industrial paint circulation. The 4-ball lower’s 1000 cc configuration powers a maximum continuous flow rate.
Features
The direct current (DC) circulation pump with intelligent (i) control drive efficiency and sustainability in high volume industrial paint circulation. The 4-ball lower’s 1000 cc configuration powers a maximum continuous flow rate.
The electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- The 3 horse power (HP) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
- ATEX, IECEx, JPNEx, CCCEx and KCS certifications confirm safe operation worldwide.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- The stainless steel (SST) lower is coated with Ultralife for extensive durability.
- Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.
- The floor stand has a compact footprint with a space-saving vertical design.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
| Cycles per Gallon | 3.8 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Thread Type | Sanitary quick clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Thread Type | Sanitary quick clamp |
| Fluid Section Type | Sealed 4-ball |
| Includes | Basic controls, Floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Lower Type | Sealed 4-ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 5.3 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 4.1 |
| Maximum Working Pressure (psi) | 600 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 3 |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
| Cycles per Gallon | 3.8 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Type | Sanitary quick clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Outlet Thread Type | Sanitary quick clamp |
| Fluid Section Type | Sealed 4-ball |
| Includes | Basic controls, Floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Lower Type | Sealed 4-ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 20 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 4.1 |
| Maximum Working Pressure (bar) | 41.4 |
| Maximum Working Pressure (kPa) | 4137 |
| Maximum Working Pressure (psi) | 600 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | AC |
| Output per Cycle (cm³) | 1000 |
| Portable | Non-Portable |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
