Paint Kitchen

E_FloDCi_4Ball2500_4000cc

Direct current (DC) electric piston pumps with intelligent (i) control drive efficiency and sustainability for high volume industrial paint circulation. The circulation pump’s 4-ball lowers come in 750 to 4,000 cc configurations that meet every flow application.

Endura-Flo_Family

Choose between Graco’s Endura-Flo Extended Pressure 4:1 models or Extended Durability 3:1.

21997_605x525

Graco’s E-Flo DC 4-Ball Electric pumps are ideal for small to medium circulation systems with outputs up to 2000 cc per cycle.

Glutton bellows pump

Graco’s Glutton bellows seal design pump handles a broad range of coatings. The external check allows for quick maintenance for materials that pack or mat out easily.

15087_605x525

Dura-Flo and Xtreme pumps for liquid coatings are designed to handle a high range of pressure without compromising flow.

18364_605x525

Graco’s E-Flo 4-Ball Pumps for liquid coatings have a dual lower and outputs up to 4000 cc per cycle.

21971_605x525

Graco’s E-Flo 2-Ball electric supply pump is for applications requiring high pressure, up to 206 bar (3000 psi). Plus the minimal pulsation at changeover provides a more consistent finish.

18381_605x525

Graco’s High-Flo 4-Ball pneumatic pumps are designed to handle tough finishing applications, run longer and give you outstanding performance.

18602_605x525

The Merkur Bellows Pump easily handles shear-sensitive materials, including UV coatings and waterborne materials.

19929

Graco’s Monark 2-Ball Circulation & Supply Pumps offer compatibility with a number of materials. With a slightly smaller air motor to its President counterpart, this pneumatic 2-Ball Piston Pump is great for consistency and low pressure.

18372_605x525

Graco’s President 2-Ball Circulation & Supply Pumps for Liquid Coatings is a pneumatic positive displacement pump with a 2-ball design for uniform and easily controlled delivery.

S4B_President_1257_625x525

Graco’s President Sealed 4-Ball Circulation & Supply Pumps offer improved durability, more compatibility, and longer life span.

15232

Graco’s Triton 1:1 Pumps offer a more effective alternative to traditional pressure pots and standard diaphragm pumps. By utilising air-operated diaphragm technology, this spray package applies a high quality, decorative finish to wood and metal.

19173_605x525

Graco’s Viscount 2-Ball Circulation & Supply Pumps utilise hydraulic powered piston pumps for high efficiency. The unique design allows it to operate inside the factory and outdoors.

S4BPlus_600x400

Keep your paint circulation system up-and-running with minimal maintenance. Sealed 4-ball pump lowers are easier, faster and cheaper to replace than pump assemblies. Completely sealed, this lower works for any pumping application in your paint mix room - even catalysed coatings.

E_FloDCi_2Ball

Direct current (DC) electric piston pumps with intelligent (i) control supply high volume liquid finishing applications. With a 145 to 1,000 cc volume per cycle range, the supply pump’s 2-ball lowers achieve 6:1 to 46:1 equivalent pressure ratios.

Paint agitators

Properly mixing material is the first step in industrial finishing success. Graco offers industrial agitators and agitator motors that fit all kinds of containers and applications.

controllers_625x525

Graco’s spray booth controllers improve performance and data management.

6770_605x525

Air preparation is key to controlling the finishing process and prolonging the life of finishing equipment. Graco offers a wide range of air preparation equipment to meet all of your finishing needs.

2, 2.5, 10, 15 gallon paint pressure pots

Pressure Pots are a crucial element of the finishing system and can be used in a variety of applications.

25R487

Precise fluid control is crucial to any finishing process. Graco has a proven line of fluid and back pressure regulators to meet all of your finishing needs.

12144_605x525

Surge suppressors (also known as surge tanks or pulsation dampeners) reduce unwanted pulsation in paint circulation system lines. During pump changeovers, fluid pressure between pumps and applicators briefly drops. Surge suppressors make the pressure consistent, keeping fluid flow smooth.

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco