Graco Inc.

Husky 1050HP High Pressure Air-Operated Diaphragm Pump  1 inch Air-Operated Triple Diaphragm Pump

The Husky 1050HP has a 1 inch (25.4mm) connection and is available in aluminum and stainless steel. Choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve.

Kur iegādāties
Koplietot |

The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design; make this one of the most unique high pressure diaphragm pumps on the market.

Benefits of the Husky 1050HP Double Diaphragm Pump

  • Increased fluid pressure without sacrificing flow
  • Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
  • Reduce air consumption up to 50% with the low pressure mode
  • Same repair parts as the Husky 1050 diaphragm pump

Overview
Maximum fluid flow for High Pressure Mode
50 gpm (189 l/min)
Maximum Fluid Discharge Pressure
125 psi (17.2 bars, 1.72 MPa)
Maximum size pumpable solids
1/8 in (3.2 mm)
Fluid displacement per cycle
0.2 g (0.76 liters)

Husky 1050HP Performance

Low Pressure Setting 1050 HP

Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:

  • Step 1 – Go to our Pump Selector Tool
  • Step 2 – Fill in your pumps part number in the right corner
  • Step 3 – Get an overview of all repair kits and accessories for your pump.

 

Process Pump Selector
Chemical Compatibility Guide

Contact Us

Uzņēmums Graco augsti novērtē jūsu privātumu. Mēs netirgosim jūsu informāciju citiem uzņēmumiem. Tomēr jūsu informācija var tikt kopīgota ar Graco izplatīšanas partneriem ar nolūku vislabākā veidā apmierināt jūsu vajadzības. Plašāku informāciju skatiet mūsu privātuma politikā.

  • Increased fluid pressure without sacrificing flow 
  • Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
  • Reduce air consumption up to 50% with the low pressure mode 
  • Same repair parts as our Husky 1050 air-operated double diaphragm pump reduces inventory levels
  • Application areas: Filter press, ceramic, high head pressure or long distance
Skatīt vērtības metriskajā mērvienību sistēmā. Skatīt vērtības ASV mērvienību sistēmā.

Husky 1050HP 2:1 Air-Operated Diaphragm Pump
Maximum fluid working pressure
250 psi
1.72 MPa,17.2 bar
Air pressure operating range
20-125 psi
0.14-0.86 MPa, 1.4-8.6 bar
Fluid displacement per cycle
Low Pressure Setting
0.17 g
0.64 l
High Pressure Setting
0.20 g
0.76 l
Air consumption
at 70 psi, 20 gpm
at 4.8 bar, 76 lpm
Low Pressure Setting
26 scfm
0.7 cubic meters per minute
High Pressure Setting
51 scfm
1.4 cubic meters per minute
Maximum values with water as media under submerged inlet conditions at ambient temperature:
Maximum air consumption
Low Pressure Setting
59 scfm
1.7 cubic meters per minute
High Pressure Setting
95 scfm
2.7 cubic meters per minute
Maximum free-flow delivery
Low Pressure Setting
50 gpm
189 lpm
High Pressure Setting
46 gpm
174 lpm
Maximum pump speed
Low Pressure Setting
280 cpm
280 cpm
High Pressure Setting
225 cpm
225 cpm
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)
16 ft dry, 29 ft wet
4.9 m dry, 8.8 m wet
Maximum size pumpable solids
1/8 in
3.2 mm
Recommended cycle rate for continuous use
93–140 cpm (in Low or High setting)
93–140 cpm (in Low or High setting)
Recommended cycle rate for circulation systems
20 cpm (in Low or High setting)
20 cpm (in Low or High setting)
Air inlet size
3/4 npt(f)
3/4 npt(f)
Fluid inlet size
1 in. npt(f) or 1 in. bspt
1 in. npt(f) or 1 in. bspt
Fluid outlet size
1 in. npt(f) or 1 in. bspt
1 in. npt(f) or 1 in. bspt
Weight
48 lb (aluminum manifolds) 60 lb (SST manifolds)
21.8 kg (aluminum manifolds)27.2 kg (SST manifolds)
Sound Power (measured per ISO-9614–2)
At 70 psi (0.48 MPa, 4.8 bar) and 50 cpm
Low Pressure Setting
78 dBa
78 dBa
High Pressure Setting
91 dBa
91 dBa
At 100 psi (0.7 MPa, 7.0 bar) and full flow
Low Pressure Setting
90 dBa
90 dBa
High Pressure Setting
102 dBa
102 dBa
Sound Pressure (tested 3.28 ft [1 m] from equipment)
At 70 psi (0.48 MPa, 4.8 bar) and 50 cpm
Low Pressure Setting
84 dBa
84 dBa
High Pressure Setting
96 dBa
96 dBa
At 100 psi (0.7 MPa, 7.0 bar) and full flow
Low Pressure Setting
84 dBa
84 dBa
High Pressure Setting
96 dBa
96 dBa
Wetted parts
aluminum plus the material(s) chosen for seat, ball, and diaphragm options.
aluminum plus the material(s) chosen for seat, ball, and diaphragm options.
Non-wetted external parts
aluminum, coated carbon steel
aluminum, coated carbon steel