SmartWare Technology SmartWare Shot Dispense Kit
Turn your supply system pump into a dosing system
The SmartWare Shot Dispense Kit contains everything you need to convert your existing Graco pump into a dosing system. It's an accurate, economical way to dose material – saving you time, material and labor costs.
Compatible with DuraFlo or CheckMate pumps with NXT Air Motor technology and most Graco Supply Systems
- Allows you to dose a preset amount of single-component material with your Graco pump
- A great alternative to manual methods such as mechanical counters, scales or custom systems
- An economical alternative to fully automated systems
- Shot size ranges from 6 cc's to 1000 gal (3,785 L)
- Accuracy ranges from 0.25 to 4%, depending on material and shot size
Håndbøker
- 3A1162B, Solenoid Changeover Kits Installation-Parts, English (Bare på engelsk)
- 3A0294J - SmartWare Shot Dispense Kit, Instructions-Parts, English [andre språk]
- Foot Switch Kit Instructions-Parts, 3A1161B, English (Bare på engelsk)
- 199369D, Smartware Batch/Shot Dispense, EU-Declaration of Conformity (Bare på engelsk)
Litteratur
- 340648ENEU, SmartWare Technology [andre språk]
- 340764EN, SmartWare User Guide (Bare på engelsk)
SmartWare Shot Dispense Kit | |
Power Supply Requirements |
100 – 240 Vac, 50/60 Hz, single phase, 1.2 amps max
100 – 240 Vac, 50/60 Hz, single phase, 1.2 amps max
|
Pressure Transducer Manifold | |
Maximum Working Fluid Pressure |
7500 psi
52.5 MPa/5.25 bar
|
Ambient Operating Temperature Range |
32 to 120° F
0 to 49° C
|
Operating Humidity Range |
0 – 90% non-condensing
0 – 90% non-condensing
|