Cart
Poly-Cote 115
2k Polyurethane Coating | Sherwin-Williams
Poly-Cote 115 2k Polyurethane
Product Description:
POLY-COTE 115 is a fl exible two component polyurethane coating formulated to provide optimal build properties, good recoatability properties and aesthetic properties. The required coating thickness can be applied in one coat – even on seams, welds, and rivets. It is a 100% solids, elastomeric, aromatic polyurethane formulated without solvents.
PRODUCT CHARACTERISTICS:
Finish: Gloss
Color: Beige, Gray, Black, and Blue
Volume Solids: 100% mixed
VOC: No measurable VOC levels
Mix Ratio: 1A:3B by volume
Recommended Spreading Rate per coat:
| Standard | AWWA | |||
| Minimum | Maximum | Minimum | Maximum | |
| Wet mils (microns) | 20.0 (500) | >500* (12,500) | ||
| Dry mils (microns) | 20.0 (500) | >500* (12,500) | ||
| ~Coverage sq ft/gal (sq m/L) | 3 (0.07) | 80 (1.96) | ||
| Theoretical coverage sq ft/gal (sq m/L) @ 1 mil/25 micron dft | 1600 (39.2) | |||
*250 mils (6250 microns) maximum for NSF applications, 26 mils (650 microns) maximum for FDA applications **For Poly-Cote 115FR, approximate coverage is 30 sq ft/gal (0.74 sq m/L) | ||||
NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.
Recommended Uses:
- Water Conveyance Piping
- Water & Wastewater Market
- Mining
- Rail
- Pulp & Paper Industry
- Transmission Poles
- Meets AWWA C222
- Meets USDA requirement for incidental contact
*Note: For complete product information, please refer to sherwin-williams.com.
Contact an Expert
Custom Equipment
Recommended Products
For spraying Poly-Cote 115
Brochure Download
Wastewater / Water Industry Brochure: Sherwin-Williams and Graco
Download our Wastewater / Water Industry Brochure and see how Graco equipment matches-up with Sherwin-Williams coatings
