Cart
Reactor E-10hp
230 V Reactor E-10HP Sprayer
Part Number: 24R900
Reactor E-10hp
230 V Reactor E-10HP Sprayer
Part Number: 24R900
If you'd like to add polyurea projects to your lineup, the Reactor E-10hp High Pressure Proportioner is a smart, affordable investment that can help your business grow. The Reactor E-10hp provides the high pressure power and performance you need to spray polyurea coatings. It's lightweight and porta...
More InfoFeatures
Product Brochure
If you'd like to add polyurea projects to your lineup, the Reactor E-10hp High Pressure Proportioner is a smart, affordable investment that can help your business grow. The Reactor E-10hp provides the high pressure power and performance you need to spray polyurea coatings. It's lightweight and portable – and runs on residential power so you don’t need to invest in a generator. With the system’s innovative boost heat and insulated tanks, material heats up fast so you’re up and running sooner. In fact, you're ready to spray in 20 minutes, compared to over an hour startup time on a standard Reactor E-10.
Entry-level system for pure and hybrid polyurea coatings.
Digital heat controls
- Allows you to enter the exact temperatures you need
- Uses the same circuit boards as a standard Reactor
Motor
- Offers 50% more power than the Reactor E-10
- Provides improved spray performance with reduced pressure drop
Low Level Sensors
- Indicates when material is low (1 gal/3.8 L remaining)
- No contact with materials - prevents buildup
Boost Heat
- Directs unused power from the motor circuit to additional heater rods
- Additional heater power brings material to desired temperatures faster during recirculation mode
Insulated Tanks
- Double-wall insulated to retain heat
- Smooth interior lining for easy cleaning
- Improved seal design on lid for better moisture control
Quick knockdown Lower Pumps
- Easy disassembly and maintenance
Robust Hybrid Heater
- More power, faster material handling means more uptime
Temperature Guages in Y-strainers
- Provides accurate tank temperature readings
Specifications & Documents
Technical Specifications
Convert to Metric| Amperage (A) | 15 |
|---|---|
| Application | Protective Coatings |
| Base Inlet Size (in) | 1/4 |
| Catalyst Inlet Size (in) | 1/4 |
| Compatible Material | Plural Components |
| Construction | Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
| Frequency (Hz) | 50/60 |
| Gun Type | No Gun |
| Includes | Proportioner, (2) Heaters |
| Maximum Flow Rate (GPM) | 1 |
| Maximum Working Pressure (MPa) | 17.2 |
| Maximum Working Pressure (psi) | 2500 |
| Model | Reactor |
| Overall Depth (in) | 36 |
| Overall Height (in) | 46 |
| Overall Width (in) | 29 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Series | E-10hp |
| Type | Plural Component Sprayer |
| Voltage (V) | 230 |
| Amperage (A) | 15 |
| Application | Protective Coatings |
| Base Inlet Size (cm) | 0.635 |
| Base Inlet Size (in) | 1/4 |
| Base Inlet Size (mm) | 6.35 |
| Catalyst Inlet Size (cm) | 0.635 |
| Catalyst Inlet Size (in) | 1/4 |
| Catalyst Inlet Size (mm) | 6.35 |
| Compatible Material | Plural Components |
| Construction | Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
| Frequency (Hz) | 50/60 |
| Gun Type | No Gun |
| Includes | Proportioner, (2) Heaters |
| Maximum Flow Rate (L/min) | 3.79 |
| Maximum Flow Rate (cc/min) | 3790 |
| Maximum Working Pressure (MPa) | 17.2 |
| Maximum Working Pressure (bar) | 172 |
| Maximum Working Pressure (kPa) | 17200 |
| Maximum Working Pressure (psi) | 2500 |
| Model | Reactor |
| Overall Depth (cm) | 91.4 |
| Overall Depth (mm) | 914 |
| Overall Height (cm) | 116.8 |
| Overall Height (mm) | 1168 |
| Overall Width (cm) | 73.7 |
| Overall Width (mm) | 737 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Series | E-10hp |
| Type | Plural Component Sprayer |
| Voltage (V) | 230 |
Product Manuals
Sales Literature
Certifications
