Reactor E-10
Reactor E-10 Proportioner Package, 2K Manual Gun, 240 V, 1PH
24R985
Reactor E-10
Reactor E-10 Proportioner Package, 2K Manual Gun, 240 V, 1PH
24R985
The unheated Reactor E-10 is equipped with on-board tanks, allowing for simple and accurate mixing of higher viscosity plural-component materials at higher outputs. The Reactor E-10’s advanced features give you increased uptime and reliability, longer equipment life and reduced maintenance.
Features
Product Brochure
The unheated Reactor E-10 is equipped with on-board tanks, allowing for simple and accurate mixing of higher viscosity plural-component materials at higher outputs. The Reactor E-10’s advanced features give you increased uptime and reliability, longer equipment life and reduced maintenance.
For medium to large no-heat joint fill applications.
- Weighs just 150 lb (68 kg)
- Materials are gravity-fed from on-board tanks
- Handles higher-viscosity materials
- Max output of 0.50 gpm (1.9 lpm)
- Simple start & stop with single knob operation
- Plugs into a standard electrical wall unit
- Easy to maneuver, even in tight areas
Rugged, Portable Design
- Large wheels for simple maneuvering
- Weighs just 150 pounds (68 kg)
- Reliable gravity feeding from on-board tanks
High Performance Operations
- Electric motor offers improved performance and reduced operating costs
- Maximum output of 0.50 gpm (1.9 lpm)
- Plugs into standard electrical wall outlet
Reduced Maintenance
- Easy-to-service fluid section cuts maintenance times
Specifications
Technical Specifications
Convert to Metric| Air Inlet Size (in) | 1/4 |
|---|---|
| Air Inlet Thread Type | Quick-Disconnect Pin |
| Air Outlet Gender | Male |
| Air Outlet Size (in) | 1/4 |
| Air Outlet Thread Type | NPSM |
| Amperage (A) | 8 |
| Application | Spray Foam |
| Applicator Type | Manual |
| Compatible Material | Plural Components |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | 2K Manual |
| Hose Length (ft) | 35 |
| Includes | Proportioner, 2K Manual Dispense Gun, Unheated Hose |
| Material Application | Polyurethane Foam |
| Maximum Flow Rate (lb/min) | 12 |
| Maximum Fluid Temperature (°F) | 160 |
| Maximum Hose Length (ft) | 105 |
| Maximum Mix Ratio | 1:1 |
| Maximum Working Pressure (MPa) | 13.8 |
| Maximum Working Pressure (psi) | 2000 |
| Overall Depth (in) | 30 |
| Overall Height (in) | 44 |
| Overall Width (in) | 26.5 |
| Phase | 1 |
| Power Rating (W) | 1800 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Product Type | Plural Component |
| Sound Pressure Level (dB(A)) | 84.5 |
| Tank Capacity (gal) | 7 |
| Type | Proportioner Package |
| Wetted Material | Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
| Air Inlet Size (cm) | 0.635 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Type | Quick-Disconnect Pin |
| Air Outlet Gender | Male |
| Air Outlet Size (cm) | 0.635 |
| Air Outlet Thread Type | NPSM |
| Amperage (A) | 8 |
| Application | Spray Foam |
| Applicator Type | Manual |
| Compatible Material | Plural Components |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | 2K Manual |
| Hose Length (m) | 10.668 |
| Includes | Proportioner, 2K Manual Dispense Gun, Unheated Hose |
| Material Application | Polyurethane Foam |
| Maximum Flow Rate (kg/min) | 5.44 |
| Maximum Fluid Temperature (°C) | 71 |
| Maximum Hose Length (m) | 32 |
| Maximum Mix Ratio | 1:1 |
| Maximum Working Pressure (MPa) | 13.8 |
| Maximum Working Pressure (bar) | 137.9 |
| Maximum Working Pressure (kPa) | 13790 |
| Overall Depth (cm) | 76.2 |
| Overall Depth (mm) | 762 |
| Overall Height (cm) | 111.8 |
| Overall Height (mm) | 1118 |
| Overall Width (cm) | 67.3 |
| Overall Width (mm) | 673 |
| Phase | 1 |
| Power Rating (W) | 1800 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Product Type | Plural Component |
| Sound Pressure Level (dB(A)) | 84.5 |
| Tank Capacity (L) | 26.5 |
| Type | Proportioner Package |
| Wetted Material | Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
