Cart
E-Flo DCi 2-Ball
E-Flo DCi 2-Ball Electric Pump, 6:1, 1000cc, 2.2 kW (3 HP), 380-480 VAC 3 Phase, Stainless Steel Construction, Basic Controls, No Stand
Part Number: Y06BG0
Image is for illustrative purposes only.
E-Flo DCi 2-Ball
E-Flo DCi 2-Ball Electric Pump, 6:1, 1000cc, 2.2 kW (3 HP), 380-480 VAC 3 Phase, Stainless Steel Construction, Basic Controls, No Stand
Part Number: Y06BG0
Direct current (DC) supply pump with intelligent (i) control has a 1000 cc volume per cycle range. The 2-ball lower attains a 6:1 equivalent pressure ratio.
Product is Discontinued
Replacement Product Not Available
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Direct current (DC) supply pump with intelligent (i) control has a 1000 cc volume per cycle range. The 2-ball lower attains a 6:1 equivalent pressure ratio.
Electric piston pump supplies paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 2.2 kW (3 horse power (HP)) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
- Wetted section has stainless steel construction for durability.
- Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Supply |
|---|---|
| Compatible Material | Solvent-borne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Includes | Basic Controls, No Stand |
| Input Voltage (V AC) | 380 - 480 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (gpm) | 5.3 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 4.2 |
| Maximum Working Pressure (psi) | 620 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Power Rating (HP) | 3 |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
| Application | Supply |
| Compatible Material | Solvent-borne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Size (mm) | 25.4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Includes | Basic Controls, No Stand |
| Input Voltage (V AC) | 380 - 480 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (l/min) | 20 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 4.2 |
| Maximum Working Pressure (bar) | 8992 |
| Maximum Working Pressure (kPa) | 4274 |
| Maximum Working Pressure (psi) | 620 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
Product Manuals
