Graco Inc.

SaniForce 2150 Double Diaphragm Pump  2 Inch Air-Operated Double Diaphragm Sanitary Pump

2 inch air-operated double sanitary diaphragm with flow rates up to 150 gpm (568 lpm)

Kust ostaTeabepäring

Graco’s SaniForce 2150 air-operated double diaphragm sanitary pumps have one of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmolded EPDM/PTFE.

Available in CE1935/2004 - check manual for configuration


SaniForce 2150 Double Diaphragm Pump

  • 2-1/2 in (63.5 mm) Tri-clamp connection
  • Flow rates up to 150 gpm (568 lpm)
  • Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
  • All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
  • High volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from original container to smaller receptacles - up to 20,000 cps
  • Suitable to pump such products as: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies 
Husky AODD top view

Patented, lube-free air valve

  • Three-way pilot valve for no-stick operation
  • Long-lasting 16 Series stainless steel rod design for long life and corrosion resistance
  • 1040, 1590 and 2150 SaniForce pumps use common center sections
  • 100% externally serviceable air valve
Overmolded PTFE Diaphragm

PTFE/EPDM Overmolded Diaphragms

  • Overmolded diaphragm plate with PTFE on the fluid side and EPDM on the air side on Graco's PTFE/EPDM diaphragms so there's no place to harbor bacteria
  • Improve wear and diaphragm life with no exposed diaphragm plate on the fluid side
  • Longer diaphragm life in abrasive applications that still require PTFE
  • Available on the SaniForce 1040, 1590, 2150 and SaniForce HS 1590 and 3150


Muud lugemismaterjalid

SaniForce 1040 Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
50 scfm
1.4 m³/minute
Air consumption at 70 psi, 20 gpm
41 scfm
1.2 m³/minute
Maximum free-flow delivery
41 gpm
159 lpm
Maximum pump speed
256 cpm
256 cpm
Gallons/liters per cycle*
0.16 g
0.57 l
Maximum suction lift
29 ft wet, 16 ft dry
8.8 m wet, 4.9 m dry
Maximum size pumpable solids
1/8 in
3.2 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
92 dB(A)
92 dB(A)
Sound power level
100 dB(A)
100 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
73 dB(A)
73 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
Stainless Steel
Inlet/Outlet Sizes
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Fluid inlet size
1.5 in sanitary flange
1.5 in sanitary flange
Fluid outlet size
1.5 in sanitary flange
1.5 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
stainless steel
stainless steel
Wetted materials depending on model
EPDM, Polychloroprene, PTFE, Santoprene
EPDM, Polychloroprene, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
FD1 Models
55 lb
24.9 kg
FA1 Models
49 lb
22.2 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.