E-Flo iQ is a complete tank-to-tip solution for intelligent metering. With an electric servo-driven motor, you can meter directly from the drum and maintain optimal flow control — without the need of a costly external dosing system.
Metering directly from the drum reduces the number of system components and eliminates the need for an external dosing device altogether.
With fewer components, easier installation, lower robot payload, and fewer delays, you’ll reduce maintenance and minimize the chances of costly downtime.
The electric servo driven motor of the E-Flo iQ system is always aware of the position of the piston pump and its velocity, thus allowing the flow rate to be controlled and maintained from pump to the point of dispense.
The E-Flo iQ can be configured to meet all your dispense requirements for both non-heated as heated applications up to 70°C (158°F), including abrasive adhesives.
By controlling the flow rate up to the point of dispense you can get an accurate dispense from start to finish and during the complete length of the bead.
Setting up and programming a metering system has never been easier than with the Advanced Display Module (ADM) on the E-Flo iQ, It’s intuitive screens make setting up of a bead profile quick and easy.
For complete integration with PLC simply connect the communication gateway module (CGM) to the PLC. Currently available protocols include EtherNet I/P, PROFINET, DeviceNet, or PROFIBUS.
1:1 Extruder
Supply, metering and dispense system for 19-liter (5-gal) pails
1K Ultra-Lite
For precise bead dispensing of sealants and adhesives
8900 Proportioner
Handles two-component materials where one or both components are high-viscosity
Advanjet Jetting Valve
Precision non-contact jetting dispense solutions
Ambient Supply Systems
Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials
AutoPlus Gun
For streaming, spray and extrusion
Automatic Dispense Valves
Automatic valves with ball needle/seat design or snuff-back design
Compensators
Pressure compensating valves for consistent bead control
Dispensit 1052 and 1053 Valves
Positive displacement metering rod valves for low to high viscosity materials
Dispensit 1092 and 1093 Valves
Positive displacement metering rod valves for low to high viscosity materials
Dispensit 1206 Valve
Positive displacement metering rod valves for precision dispensing
Dispensit 1230 Valve
Positive displacement metering rod valves for precision dispensing
Dispensit 715 Valve
On-off valve for sealing, bonding and gasketing
DynaMite Dispense Valve
Improve quality and minimize rework
E-Flo SP Electric Pumps and Supply Systems
Systematically improve manufacturing processes with Graco E-Flo SP Electric...
EFR
The Electric Fixed Ratio System (EFR) can handle a wide range of 2K materials, and can provide a precise dispensi...
ExactaBlend AGP
For sealant and adhesive applications in curtainwall and insulating glass
HFR Metering System for Sealants and Adhesives
Hydraulic fixed ratio system for two-part epoxies, silicones, adhesives
Heated Fluid Regulator
Provides precision dispense for Therm-O-Flow Systems
In-Line Flow Guns
For precise control of low-viscosity sealants and adhesives
InvisiPac HM25c
Compact system for case and carton sealing
MD2 Dispense Valve
Accurately dispenses and mixes two-component sealants and adhesives
MMV
Accurate shot metering during small parts assembly and encapsulation
PCF Metering System
Advanced closed-loop technology assures a precise, continuous flow of material
PD44
For micro dispensing two-component materials
PGM Metering System
Precision gear metering and dispense system for superior bead control
PR70
Compact Benchtop Meter, Mix and Dispense System
Pistol Grip Dispense Guns
For precise control of automotive and industrial adhesives and sealants
PrecisionSwirl
Applies a uniform swirl pattern in robotic applications
Progressive Cavity Pump
For use with Thermal Interface Materials in electronics manufacturing and product assembly
SmartWare Technology
Turn your supply system pump into a dosing system
Therm-O-Flow 20
For hot melt sealants and adhesives in 20 liter (5-gal) pails
Therm-O-Flow 200
For hot melt sealants and adhesives in 200 liter (55-gal) drums
Therm-O-Flow Guns
For applying hot melt materials
Ultra-Lite 4000 and 4000 SD
For precise control of sealant and adhesive materials
Ultra-Lite 6000
For precise control of low-to-medium viscosity materials
Uni-Drum 1200
Feed system for sealants in 1200 liter (300 gal) bulk containers
UniXact Automated Dispensing Solutions
Precision fluid dispense for the toughest applications
VPM Metering System
Variable paste machine handles high-viscosity tooling pastes or adhesives
Voltex Dynamic Mix Valves
Consistent Mixing for Challenging Two-component Materials
Warm Melt Supply Systems
Bulk unloader for warm melt materials and temperature conditioning applications
iQ Dispense Valves
iQ Dispense Valves deliver long-lasting and dependable performance for single component sealant and...
