Dispensit 1092 and 1093 Valves Precision Dispense Valve
Positive displacement metering rod valves for low to high viscosity materials
The Dispensit Model 1092 & 1093 rod positive displacement valves with luer lock needles. High precision repeatable shot-to-shot (1092) and bead (1093) volumetric dispensing. For tube dispense or pinch tube dispense.
- For low to high viscosity materials with various wetted component configurations
for abrasive filled, or corrosive materials - 1092 is a pneumatically-controlled valve with micrometer adjustable dispense volumes
for accurate, repeatable shot dispensing - 1093 is a servo-driven valve for programmable, precise shot or bead dispensing
- Pneumatic and electronic controls can be integrated for automated applications
- Pnuematic drive with micrometer stroke adjustment (Model 1092). Servo motor drive (Model 1093)
- Insensitive to changes in material viscosity-very thin to paste consistency.
- Easily integrated with automated equipment.
- Compatible with a wide variety of materials
Käyttöoppaat
- 3A5115B, Dispensit 4104A, Operation-Maintenance, English (vain englanti)
- 332089C - Dispensit 1092, Operation - Maintenance, English (vain englanti)
Kirjallisuus
339630EN, Dispensit Single-Component Metering and Dispensing Valves
Dispensit 1092 | |
Maximum Ambient Temperature |
110°F
43°C
|
Maximum Operating Temp |
150°F
65°C
|
Maximum Outlet Fluid Working Pressure |
2000 psi
14 MPa, 138 bar
|
Maximum Air Working Pressure |
100 psi
0.7 MPa, 7 bar
|
Minimum Air Working Pressure |
70 psi
480 kPa, 4.8 bar
|
Maximum Material Inlet Pressure |
Metal Sleeves: 1200 psi
8 MPa, 83 bar
|
Plastic Sleeves: 400 psi |
2.8 MPa, 28 bar
2.8 MPa, 28 bar
|
Supplied Air Requirements. |
1 to 3 cfm at 80 psi to 100 psi
1 to 3 cfm at 80 psi to 100 psi
|
Shot Size Range (depending on metering rods selected) |
0.024 cc to 9.600 cc
0.024 cc to 9.600 cc
|
Maximum Cycle Rate (application dependent, heat required) . |
Up to 60 cycles per minute
Up to 60 cycles per minute
|
Dimensions (H x L x W), height to end of material inlet |
Height 1092-10A-2: 12.53 in
395 mm
|
Height 1092-10A-4: 17.16 in. |
436 mm
436 mm
|
Height 092-10A-6: 20.28 in. |
515 mm
515 mm
|
Length, non cycle detection: 8.38 in. |
395 mm
395 mm
|
Length, Detection: 9.13 in |
232 mm
232 mm
|
Single Needle Outlet (Standard): 1.75 in. |
45 mm
45 mm
|
Graco-supplied Feed System Assemblies (depends on selected options): | |
Smallest: 22.5 x 10 x 4 in. |
572 x 254 x 102 mm
572 x 254 x 102 mm
|
Largest: 60 x 28 x 19 in. |
(1524 x 711 x 483 mm
(1524 x 711 x 483 mm
|
Weight: | |
1092-10A-2 |
6-7 lb
2.72-3.18 kg
|
1092-10A-4 |
10-11 lb
4.54-4.99 kg
|
1092-10A-6 |
14-15 lb
6.35-6.80 kg
|
Wetted Parts |
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
|