Cart
Injecto-Flo II
Injecto-Flo® II Electric Oil Pump, 6 Litre Reservoir, 230 VAC, 0.2 lpm, Straight Connector (10 mm Pipe)
Part Number: 122564
Image is for illustrative purposes only.
Injecto-Flo II
Injecto-Flo® II Electric Oil Pump, 6 Litre Reservoir, 230 VAC, 0.2 lpm, Straight Connector (10 mm Pipe)
Part Number: 122564
The Injecto-Flo II has several output volumes to serve 5-50 lubrication points, while an optional integrated control with system monitoring provides overall control and allows for easy setup and troubleshooting. A dependable high-quality gear pump for years of trouble-free operation combined with In...
More InfoFeatures
Product Brochure
The Injecto-Flo II has several output volumes to serve 5-50 lubrication points, while an optional integrated control with system monitoring provides overall control and allows for easy setup and troubleshooting. A dependable high-quality gear pump for years of trouble-free operation combined with Injecto-Flo II piston distributor metering devices completes your oil or fluid grease lubrication system.
- Fast refills without spills
- 230/460 VAC
- Optional low level, pressure switch, pressure gauge and feedback LEDs help ensure proper system operation
- Built-in vent valve gets you up and working with piston distributors fast–no kits to purchase and assemble
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | In-Plant Machinery |
|---|---|
| Compatible Material | Oil |
| Compatible Metering Device | Single Line Parallel |
| For Use With | Single Line Systems |
| Material | Plastic |
| Maximum Flow Rate (GPM) | 0.05 |
| Maximum Working Pressure (MPa) | 3 |
| Maximum Working Pressure (psi) | 435 |
| Maximum cST Grade (cST) | 100 |
| Minimum cST Grade (cST) | 50 |
| Model | Injecto-Flo |
| Overall Depth (in) | 11.42 |
| Overall Height (in) | 13.35 |
| Overall Width (in) | 7.09 |
| Power Type | Electric |
| Reservoir Size (L) | 6 |
| Reservoir Size (gal) | 1.6 |
| Series | II |
| Type | Electric Piston Pump |
| Voltage (V ac) | 230 |
| Application | In-Plant Machinery |
| Compatible Material | Oil |
| Compatible Metering Device | Single Line Parallel |
| For Use With | Single Line Systems |
| Material | Plastic |
| Maximum Flow Rate (L/min) | 0.19 |
| Maximum Working Pressure (MPa) | 3 |
| Maximum Working Pressure (bar) | 30 |
| Maximum Working Pressure (kPa) | 3000 |
| Maximum Working Pressure (psi) | 435 |
| Maximum cST Grade (cST) | 100 |
| Minimum cST Grade (cST) | 50 |
| Model | Injecto-Flo |
| Overall Depth (cm) | 29 |
| Overall Depth (mm) | 290 |
| Overall Height (cm) | 33.9 |
| Overall Height (mm) | 339 |
| Overall Width (cm) | 18 |
| Overall Width (mm) | 180 |
| Power Type | Electric |
| Reservoir Size (L) | 6 |
| Series | II |
| Type | Electric Piston Pump |
| Voltage (V ac) | 230 |
