Cart
SaniForce 1040 FG
SaniForce 1040 S/S AODD Pump w/Flange Connection, 316 S/S Seats, EPDM O-Rings, PTFE Balls & PTFE Overmoulded Diaphragms
Part Number: FD1213
SaniForce 1040 FG
SaniForce 1040 S/S AODD Pump w/Flange Connection, 316 S/S Seats, EPDM O-Rings, PTFE Balls & PTFE Overmoulded Diaphragms
Part Number: FD1213
Graco’s SaniForce 1040 air-operated double diaphragm sanitary pumps have one of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including San...
More InfoFeatures
Product BrochureGraco’s SaniForce 1040 air-operated double diaphragm sanitary pumps have one of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmoulded EPDM/PTFE.
- 38 mm (1.5 in.) Tri-clamp connection
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Fluid pressure to 8.4 bar, 0.84 MPa (120 psi)
- Flow rates of 151 lpm (40 gpm)
- High volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from original container to smaller receptacles - up to 10,000 cps
- Suitable to pump such products as: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies
Specifications & Documents
Technical Specifications
Convert to Imperial| 2.54 | |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food and Personal Care |
| Compressor required | Yes |
| Configuration code | 1040FG-PS01AS13SSPTPOEP21 |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmould |
| Fluid Section Material | 316 Stainless Steel |
| Fluid passage size (in) | 1 |
| Fluid passage size (mm) | 25.4 |
| For Use With | Food and Personal Care |
| Hazardous location approved | ATEX, IECEx |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material certification | EN 1024:2004 type 2.1 (standard) |
| Maximum Air Consumption (SCFM) | 50 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 256 |
| Maximum Flow Rate (GPM) | 41 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (in) | 0.125 |
| Maximum fluid operating temperature (°C) | 82 |
| Maximum fluid operating temperature (°F) | 180 |
| Minimum fluid operating temperature (°C) | -40 |
| Minimum fluid operating temperature (°F) | -40 |
| Model | SaniForce |
| Overall Height (in) | 16.1 |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | FDA grade |
| Seat Material | 316 Stainless Steel |
| Series | 1040 FG |
| Standards Met | FDA compliant materials, EC 1935/2004 |
| Surface finish: | 125 Ra |
| Tri-Clamp connection size | 1.5-inch |
| Type | Pneumatic diaphragm pump selector |
| Weight (lb) | 55 |
| 2.54 | |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food and Personal Care |
| Compressor required | Yes |
| Configuration code | 1040FG-PS01AS13SSPTPOEP21 |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmould |
| Fluid Section Material | 316 Stainless Steel |
| Fluid passage size (in) | 1 |
| Fluid passage size (mm) | 25.4 |
| For Use With | Food and Personal Care |
| Hazardous location approved | ATEX, IECEx |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material certification | EN 1024:2004 type 2.1 (standard) |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 256 |
| Maximum Flow Rate (L/min) | 155 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 0.32 |
| Maximum Solid Size (mm) | 3.2 |
| Maximum fluid operating temperature (°C) | 82 |
| Maximum fluid operating temperature (°F) | 180 |
| Minimum fluid operating temperature (°C) | -40 |
| Minimum fluid operating temperature (°F) | -40 |
| Model | SaniForce |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | FDA grade |
| Seat Material | 316 Stainless Steel |
| Series | 1040 FG |
| Standards Met | FDA compliant materials, EC 1935/2004 |
| Surface finish: | 125 Ra |
| Tri-Clamp connection size | 1.5-inch |
| Type | Pneumatic diaphragm pump selector |
