Cart
i-Series 1"
25 mm (1 in.) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm
Part Number: 26D885
i-Series 1"
25 mm (1 in.) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm
Part Number: 26D885
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertSpecifications & Documents
Technical Specifications
Convert to Imperial| Connection Type | Flange |
|---|---|
| Diaphragm Material | PTFE/Santoprene 2-Piece |
| Fluid Section Material | Polypropylene |
| Hazardous Location Approval | None |
| Inlet Size (in) | 1 |
| Maximum Flow Rate (gpm) | 50 |
| Maximum Fluid Operating Temperature (°C) | 66 |
| Maximum Fluid Operating Temperature (°F) | 150 |
| Maximum Fluid Pressure (MPa) | 0.69 |
| Maximum Fluid Pressure (psi) | 100 |
| Minimum Fluid Operating Temperature (°C) | 0 |
| Minimum Fluid Operating Temperature (°F) | 32 |
| Model | i-Series |
| Outlet Size (in) | 1 |
| Seat Material | Polypropylene |
| Series | 1" |
| Type | Pulsation Dampener |
| Wetted Material | Polypropylene |
| Connection Type | Flange |
| Diaphragm Material | PTFE/Santoprene 2-Piece |
| Fluid Section Material | Polypropylene |
| Hazardous Location Approval | None |
| Inlet Size (cm) | 2.54 |
| Inlet Size (in) | 1 |
| Inlet Size (mm) | 25.4 |
| Maximum Flow Rate (l/min) | 189 |
| Maximum Fluid Operating Temperature (°C) | 66 |
| Maximum Fluid Operating Temperature (°F) | 150 |
| Maximum Fluid Pressure (MPa) | 0.69 |
| Maximum Fluid Pressure (bar) | 6.9 |
| Maximum Fluid Pressure (kPa) | 689 |
| Maximum Fluid Pressure (psi) | 100 |
| Minimum Fluid Operating Temperature (°C) | 0 |
| Minimum Fluid Operating Temperature (°F) | 32 |
| Model | i-Series |
| Outlet Size (cm) | 2.54 |
| Outlet Size (in) | 1 |
| Outlet Size (mm) | 25.4 |
| Seat Material | Polypropylene |
| Series | 1" |
| Type | Pulsation Dampener |
| Wetted Material | Polypropylene |
Product Manuals
