Cart
PrecisionSwirl
Standard PrecisionSwirl Orbital Dispenser, 0.3 mm (0.012 in.) Coupler Offset for Smaller Bead Widths Typical for Hem Flange & After Hem
Part Number: 243402
PrecisionSwirl
Standard PrecisionSwirl Orbital Dispenser, 0.3 mm (0.012 in.) Coupler Offset for Smaller Bead Widths Typical for Hem Flange & After Hem
Part Number: 243402
Features
Product Brochure
PrecisionSwirl features adjustable rotational speed, stand-off distance and flow rate for greater control and for better penetration on irregular shaped parts. It is compatible with most sealants including expandable sealers, heat cure epoxy and PVC plastisol.
PrecisionSwirl produces no air turbulence so the bead profile is consistent over the bead length, reducing squeeze-out, repair and scrap. The applicator produces a wide variety of pattern widths, material thicknesses and patterns.
Applies a uniform swirl pattern in robotic applications
- Delivers open bead or closed continuous bead patterns
- Provides a circular loop swirl bead pattern
- Swirl pattern has uniform bead profile and consistent edges
Increased tip standoff simplifies robot programming
Swirl pattern can be varied along the bead path
Swirl orbital applicator has no dynamic seals
Specifications & Documents
Technical Specifications
Convert to Imperial| Connection Type | Threaded |
|---|---|
| Coupler Offset (in) | 0.012 |
| Flow Control Type | Regulation, Control |
| Maximum Working Pressure (MPa) | 24.1 |
| Maximum Working Pressure (psi) | 3500 |
| Model | PrecisionSwirl |
| Mount Location | Tool Mount |
| Type | Orbital Dispenser |
| Connection Type | Threaded |
| Coupler Offset (in) | 0.012 |
| Coupler Offset (mm) | 0.3048 |
| Flow Control Type | Regulation, Control |
| Maximum Working Pressure (MPa) | 24.1 |
| Maximum Working Pressure (bar) | 241 |
| Maximum Working Pressure (kPa) | 24100 |
| Maximum Working Pressure (kg/cm²) | 246 |
| Maximum Working Pressure (psi) | 3500 |
| Model | PrecisionSwirl |
| Mount Location | Tool Mount |
| Type | Orbital Dispenser |
