SaniForce 4150 HS

SaniForce 2.0 HS Series Pneumatic Diaphragm Pump, 4150, SP1A, SSG, FL, ‒, PS, C21

Part Number: SP4F.0054

product image

SaniForce 4150 HS

SaniForce 2.0 HS Series Pneumatic Diaphragm Pump, 4150, SP1A, SSG, FL, ‒, PS, C21

Part Number: SP4F.0054

SaniForce pneumatic diaphragm pumps are designed to meet requirements for the most rigorous food, beverage, personal care, and pharmaceutical transfer applications. SaniForce AODD pumps reduce the amount of tri-clamps and gaskets utilised in the fluid path creating a pump that is easier to sanitise... More Info
Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure
SaniForce pneumatic diaphragm pumps are designed to meet requirements for the most rigorous food, beverage, personal care, and pharmaceutical transfer applications. SaniForce AODD pumps reduce the amount of tri-clamps and gaskets utilised in the fluid path creating a pump that is easier to sanitise and clean as well as quicker and easier to disassemble and maintain. Handle solids up to 96.5 mm (3.8 in.) in diameter and allow for vertical and horizontal pump installation. 316 L stainless steel fluid section and multiple elastomer options provide flexibility to handle almost any material and cleaning chemical. Elastomer options for high temperature fluids or steam cleaning options.

Sanitary pneumatic diaphragm pumps with size ranging from 1 inch up to 101 mm (4 in.)

  • Flow rates up to 567 lpm (150 gpm) and pressure up to 8.6 bar (125 psi)
  • Handle solids up to 96.5 mm (3.8 in.) in diameter
  • Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design.
  • Surface finish options or 125, 32, or 20 Ra
  • Multiple approval and certification options: 3A, ATEX, USP Class VI, CE, 3.1 certification
  • Optional leak sensors notify users when processes may be compromised
  • 316L stainless steel wetted section
  • Multiple internal elastomers to be compatible with you material and cleaning chemicals
  • Tri-clamp and sanitary DIN connections available

Specifications & Documents

Technical Specifications

Convert to Imperial
10
4150HS.PSP1ASSGFL-PSEP21
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material 316 Stainless Steel Flapper
Centre Section Material Stainless Steel
Compatible Material Edible Oil, Food, Personal Care
Compressor required Yes
Connection Type No Manifold
Diaphragm Material PTFE/Santoprene 2-piece
Fluid Section Material 316L stainless steel
Fluid passage size (in) 4
Fluid passage size (mm) 100
For Use With Food, Personal Care
Hazardous location approved ATEX, IECEx
Manifold Configuration Dual inlet/outlet
Manifold O-Ring Material EPDM
Material Stainless Steel
Material certification EN 1024:2004 type 2.1 (standard)
Maximum Air Consumption (SCFM) 235
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 225
Maximum Flow Rate (GPM) 90
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (in) 3.8
Maximum fluid operating temperature (°C) 82
Maximum fluid operating temperature (°F) 180
Minimum fluid operating temperature (°C) -40
Minimum fluid operating temperature (°F) -40
Model SaniForce
Overall Height (in) 19.9
Power Source Pneumatic
Pump Ratio 1:1
Pump Type High Sanitation
Seat Material 316 Stainless Steel
Series 4150 HS
Standards Met FDA compliant materials, EC 1935/2004, USP Class VI
Surface finish: 32 Ra
Tri-Clamp connection size 4-inch
Type Pneumatic diaphragm pump selector
Weight (lb) 132
10
4150HS.PSP1ASSGFL-PSEP21
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material 316 Stainless Steel Flapper
Centre Section Material Stainless Steel
Compatible Material Edible Oil, Food, Personal Care
Compressor required Yes
Connection Type No Manifold
Diaphragm Material PTFE/Santoprene 2-piece
Fluid Section Material 316L stainless steel
Fluid passage size (in) 4
Fluid passage size (mm) 100
For Use With Food, Personal Care
Hazardous location approved ATEX, IECEx
Manifold Configuration Dual inlet/outlet
Manifold O-Ring Material EPDM
Material Stainless Steel
Material certification EN 1024:2004 type 2.1 (standard)
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (bar) 8
Maximum Air Pressure (kPa) 800
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 225
Maximum Flow Rate (L/min) 340
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (bar) 8
Maximum Fluid Pressure (kPa) 800
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (cm) 9.65
Maximum Solid Size (mm) 96.5
Maximum fluid operating temperature (°C) 82
Maximum fluid operating temperature (°F) 180
Minimum fluid operating temperature (°C) -40
Minimum fluid operating temperature (°F) -40
Model SaniForce
Power Source Pneumatic
Pump Ratio 1:1
Pump Type High Sanitation
Seat Material 316 Stainless Steel
Series 4150 HS
Standards Met FDA compliant materials, EC 1935/2004, USP Class VI
Surface finish: 32 Ra
Tri-Clamp connection size 4-inch
Type Pneumatic diaphragm pump selector

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco