P2 Elite

Probler P2 Elite Gun Assembly with 01 Mix Chamber Kit

GCP3R1

probler-p2-elite-left

P2 Elite

Probler P2 Elite Gun Assembly with 01 Mix Chamber Kit

GCP3R1

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to ...

More Info

Features

Product Brochure

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.

  • Easy daily maintenance
  • Responsive trigger action
  • Easy-to-replace mix chamber insert
  • Anti-crossover design virtually eliminates possibility of material entering the air piston
  • Ergonomic handle and balanced design
  • Allows use of additional accessories
  • Alternate side block hose routings
  • Allows filters to be easily removed

Specifications

Technical Specifications

Convert to Metric
Air Inlet Size (in) 1/4
Air Inlet Thread Gender Male
Air Inlet Thread Type NPT
Applicator Type Manual
Compatible Material Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
Component A Inlet Size (in) 1/2
Component A Inlet Thread Type UNF
Component B Inlet Size (in) 7/16
Component B Inlet Thread Type UNF
Component Type Plural-Component
Fluid Orifice Size (in) 0.042
For Use With Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
Gun Activation Manual
Gun Included 1
Gun Type Air-Purge
Gun Weight (lb) 3.9
Gun Weight (oz) 62.4
Maximum Air Inlet Pressure (MPa) 0.76
Maximum Air Inlet Pressure (psi) 110
Maximum Air Pressure (MPa) 0.758
Maximum Air Pressure (psi) 110
Maximum Flow Rate (lb/min) 40
Maximum Fluid Pressure (MPa) 24.1
Maximum Fluid Pressure (psi) 3500
Maximum Fluid Temperature (°F) 200
Maximum Fluid Working Pressure (MPa) 22.063
Maximum Fluid Working Pressure (psi) 3200
Minimum Air Inlet Pressure (MPa) 0.62
Minimum Air Inlet Pressure (psi) 90
Minimum Flow Rate (lb/min) 3
Model P2
Overall Height (in) 4.75
Overall Length (in) 3.125
Overall Width (in) 6.875
Pattern Size (in) 10 in @ 24 in from target
Product Type Spray Gun
Purge Method Air
Series Elite
Spray Gun Mix Type Impingement
Spray Pattern Flat
Trigger Lock Locking
Type Spray Gun
Wetted Parts Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE
Air Inlet Size (cm) 0.635
Air Inlet Size (mm) 6.35
Air Inlet Thread Gender Male
Air Inlet Thread Type NPT
Applicator Type Manual
Compatible Material Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
Component A Inlet Size (cm) 1.27
Component A Inlet Size (mm) 12.7
Component A Inlet Thread Type UNF
Component B Inlet Size (cm) 1.11125
Component B Inlet Size (mm) 11.1125
Component B Inlet Thread Type UNF
Component Type Plural-Component
Fluid Orifice Size (cm) 0.1067
Fluid Orifice Size (mm) 1.067
For Use With Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
Gun Activation Manual
Gun Included 1
Gun Type Air-Purge
Gun Weight (g) 1770
Gun Weight (kg) 1.77
Maximum Air Inlet Pressure (MPa) 0.76
Maximum Air Inlet Pressure (bar) 7.6
Maximum Air Inlet Pressure (kPa) 76
Maximum Air Inlet Pressure (kg/cm²) 7.73
Maximum Air Pressure (MPa) 0.758
Maximum Air Pressure (bar) 7.58
Maximum Air Pressure (kPa) 758
Maximum Air Pressure (kg/cm²) 7.73
Maximum Flow Rate (kg/min) 18
Maximum Fluid Pressure (MPa) 24.1
Maximum Fluid Pressure (bar) 241
Maximum Fluid Pressure (kPa) 24100
Maximum Fluid Pressure (kg/cm²) 246.07
Maximum Fluid Temperature (°C) 93
Maximum Fluid Working Pressure (MPa) 22.063
Maximum Fluid Working Pressure (bar) 220.63
Minimum Air Inlet Pressure (MPa) 0.62
Minimum Air Inlet Pressure (bar) 6.21
Minimum Air Inlet Pressure (kPa) 621
Minimum Air Inlet Pressure (kg/cm²) 6.33
Minimum Flow Rate (kg/min) 1.4
Model P2
Overall Height (cm) 12.1
Overall Height (mm) 121
Overall Length (cm) 7.9
Overall Length (mm) 79
Overall Width (cm) 17.4
Overall Width (mm) 174
Pattern Size (mm) 254
Product Type Spray Gun
Purge Method Air
Series Elite
Spray Gun Mix Type Impingement
Spray Pattern Flat
Trigger Lock Locking
Type Spray Gun
Wetted Parts Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Contact an Expert

Contact an Expert

We'll help you choose the right product for your job.

Tech Support

Tech Support

Monday-Friday
7:30 a.m.-5 p.m. Central Time

Email Support

Email Support

Reviews

Graco