Reactor E-10

Reactor E-10 Proportioner Package, Probler P2 Gun, 240 V, 1PH, 1x16A

P29572

unheated-reactor-e10-right

Reactor E-10

Reactor E-10 Proportioner Package, Probler P2 Gun, 240 V, 1PH, 1x16A

P29572

Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, ...

More Info

Features

Product Brochure

Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute.

  • Small size is ideal for on-site portability and hard-to-reach areas
  • One-person operation saves time and money
  • Use as an add-on to your existing spray business
  • Versatile - switch from cold spray to hot spray to foam
  • Saves 30% on material costs compared to disposable foam systems
  • Small ready-to-use systems with big results!

    • Intuitive start, stop and digital temperature display with single knob operation
    • Pressure balance valves give you quick and easy balancing of system pressures
    • Balanced proportioning eliminates pressure fluctuations for a consistent spray pattern
    • Easy-to-service fluid section reduces maintenance and increases productivity
    • Electric motor improves performance and reduces operating costs
    • Heaters and hose give you up to 2000 watts to pre-heat circulating material

Specifications

Technical Specifications

Convert to Metric
Air Inlet Size (in) 1/4
Air Inlet Thread Type Quick-Disconnect Pin
Air Outlet Gender Male
Air Outlet Size (in) 1/4
Air Outlet Thread Type NPSM
Amperage (A) 20
Application Spray Foam
Applicator Type Manual
Compatible Material Plural Components
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Probler P2
Hose Length (ft) 35
Includes Proportioner, Probler P2 Gun, Heated Hose
Material Application Polyurethane Foam
Maximum Flow Rate (lb/min) 12
Maximum Fluid Temperature (°F) 160
Maximum Hose Length (ft) 105
Maximum Mix Ratio 1:1
Maximum Working Pressure (MPa) 13.8
Maximum Working Pressure (psi) 2000
Overall Depth (in) 30
Overall Height (in) 44
Overall Width (in) 26.5
Phase 1
Power Rating (W) 3800
Power Source Electric
Pressure Type Low Pressure
Product Type Plural Component
Sound Pressure Level (dB(A)) 84.5
Tank Capacity (gal) 7
Type Proportioner Package
Wetted Material Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE
Air Inlet Size (cm) 0.635
Air Inlet Size (mm) 6.35
Air Inlet Thread Type Quick-Disconnect Pin
Air Outlet Gender Male
Air Outlet Size (cm) 0.635
Air Outlet Thread Type NPSM
Amperage (A) 20
Application Spray Foam
Applicator Type Manual
Compatible Material Plural Components
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Probler P2
Hose Length (m) 10.668
Includes Proportioner, Probler P2 Gun, Heated Hose
Material Application Polyurethane Foam
Maximum Flow Rate (kg/min) 5.44
Maximum Fluid Temperature (°C) 71
Maximum Hose Length (m) 32
Maximum Mix Ratio 1:1
Maximum Working Pressure (MPa) 13.8
Maximum Working Pressure (bar) 137.9
Maximum Working Pressure (kPa) 13790
Overall Depth (cm) 76.2
Overall Depth (mm) 762
Overall Height (cm) 111.8
Overall Height (mm) 1118
Overall Width (cm) 67.3
Overall Width (mm) 673
Phase 1
Power Rating (W) 3800
Power Source Electric
Pressure Type Low Pressure
Product Type Plural Component
Sound Pressure Level (dB(A)) 84.5
Tank Capacity (L) 26.5
Type Proportioner Package
Wetted Material Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Contact an Expert

Contact an Expert

We'll help you choose the right product for your job.

Tech Support

Tech Support

Monday-Friday
7:30 a.m.-5 p.m. Central Time

Email Support

Email Support

Reviews

Graco