Essential road marking removal equipment

Removing road paint, thermoplastics and tape calls for special equipment

Grinding and blasting are the most common techniques to remove  road paint

Road markings are designed for the long run, but sometimes they need to be removed. For instance when a traffic situation changes or a parking lot is redesigned. Special tools and techniques enable you to remove stripes and pavement markings efficiently.

Removing existing road striping or pavement markings is a real challenge. The markings must be efficiently removed without causing damage to the road surface. Sometimes the lines are even harder than the underlying asphalt. Moreover the materials used in asphalt are very porous, allowing road paint  to penetrate the surface pores. Reason enough to get yourself the right equipment for your road paint removal jobs.

Grinding

A grinder or scarifier is the traditional tool for fast and clean road marking removal. These specialized machines enable you to remove all types of lines found on parking lots or roadways. Overall, grinding is the fastest, most cost-efficient way for removing pavement markings. It is the most appropriate road marking removal technique, especially for removing lines that will be replaced by new markings on the same location. Even if the pavement will remain, grinding is still the best method for removing traffic paint, thermoplastic, epoxy coatings and other materials. Using the proper grinding tool, operated by an experienced worker, will minimize the risk of scarring the road surface.

Increase your line removal productivity

With an engine-propelled grinder you can double your line removal productivity. A user-friendly ride-on system, like Graco’s LineDriver, transforms your traditional grinding machine into an easy-to-move unit.

Choose the best grinder for the job

When choosing the best grinding tool for your needs, you must consider which materials you will be removing and how fast you want to complete the job. The smallest scarifiers are able to remove traffic paint and thermoplastics and can be used to smoothen uneven surfaces. The removal speed is limited to approximately 55 m2/hr when walking. The most powerful scarifiers can also be used for the removal of epoxy coatings and for inlay and grooving applications. With a LineDriver they can reach up to a removal speed of 195 m2/hr.

Other line removal methods

  • Waterblasting: This technique uses hog pressure water to remove markings from concrete and asphalt. The needle sharp water jets can even pulverize temporary marking tape. Waterblasting causes the least amount of scarring but is not powerful enough for the smoothening of uneven surfaces, nor for inlay and grooving applications.
  • Sandblasting: Using a low pressure sand jetting system, this technique captures line marking material. Sandblasting only uses minimal amounts of water and abrasives, making it a good solution for indoor applications.

Get in touch with Graco