Sharpen your skills using Graco products and equipment with expert advice on operations, troubleshooting, repairs & maintenance.
Graco’s EcoQuip vapour abrasive blast equipment was thoroughly tested for use in potentially hazardous areas involving explosive atmospheres caused by gases and vapours
The existing kerb in Denman Street, London, UK, was causing damage to a range of high-class vehicles including Bentleys, Rolls-Royces and Jaguars that frequently pulled-up there to drop-off hotel customers. The kerb needed to be modified to prevent additional damage and a cycle path added.
Creative Fabrications was recently hired to clean the exterior of the stainless steel Julie Penrose Fountain, located inside America the Beautiful State Park in Colorado Springs, Colorado.
The use of silica product in abrasive blasting has increasingly become more of a safety risk for construction workers. Exposure to too much respirable crystalline silica causes serious health problems such as lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease.
Graco’s EcoQuip Vapour Abrasive Blasting equipment is approved by ADNOC as a surface preparation solution for Zone 1 areas on DAS Island
Compressed air recommendations for the best vapour abrasive blasting results
"Beyond the Walls" kicked off with a giant land-art painting on the Champ de Mars in front of the iconic Eiffel Tower in Paris. For this artwork, he used a combination of the Ultra HH and Ultra Max II 795.
Removing the antifouling paint from a fibreglass hulls is easy with vapour abrasive blasting
There are a number of different stripping methods to remove powder coatings.
This blasting checklist guarantees the perfect preparation for all wet and vapour blasting operations
In-person events & online courses available on Graco University.
When you need product technical support, we’re always close through Graco’s A+ Service programme.