Cart
SaniForce 2150 HS
SaniForce 2.0 HS Series Pneumatic Diaphragm Pump, 2150, S01A, SSA, SS, PT, P, C21
Part Number: SP2B.0010
SaniForce 2150 HS
SaniForce 2.0 HS Series Pneumatic Diaphragm Pump, 2150, S01A, SSA, SS, PT, P, C21
Part Number: SP2B.0010
SaniForce pneumatic diaphragm pumps are designed to meet requirements for the most rigorous food, beverage, personal care, and pharmaceutical transfer applications. SaniForce AODD pumps reduce the amount of tri-clamps and gaskets utilised in the fluid path creating a pump that is easier to sanitize ...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
SaniForce pneumatic diaphragm pumps are designed to meet requirements for the most rigorous food, beverage, personal care, and pharmaceutical transfer applications. SaniForce AODD pumps reduce the amount of tri-clamps and gaskets utilised in the fluid path creating a pump that is easier to sanitize and clean as well as quicker and easier to disassemble and maintain. Handle solids up to 3.8 inches in diameter and allow for vertical and horizontal pump installation. 316L stainless steel fluid section and multiple elastomer options provide flexibility to handle almost any material and cleaning chemical. Elastomer options for high temperature fluids or steam cleaning options.
Sanitary pneumatic diaphragm pumps with size ranging from 25mm, (1 inch) up to 101 mm (4 inch)
- Flow rates up to 567 lpm (150 gpm) and pressure up to 8.6 bar (125 psi)
- Handle solids up to 96.5 mm (3.8 in) in diameter
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design.
- Surface finish options or 125, 32, or 20 Ra
- Multiple approval and certification options: 3A, ATEX, USP Class VI, CE, 3.1 certification
- Optional leak sensors notify users when processes may be compromised
- 316l stainless steel wetted section
- Multiple internal elastomers to be compatible with you material and cleaning chemicals
- Tri-clamp and sanitary DIN connections available
Specifications & Documents
Technical Specifications
Convert to Imperial| 5 | |
| 2150HS.PS01ASSASSPTPOEP21 | |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food, Personal Care |
| Compressor Required | Yes |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmould |
| Fluid Passage Size (in) | 2 |
| Fluid Passage Size (mm) | 50 |
| Fluid Section Material | 440C Stainless Steel |
| For Use With | Food, Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | Centre Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Consumption (SCFM) | 200 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (cpm) | 135 |
| Maximum Flow Rate (gpm) | 180 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (in) | 0.5 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Overall Height (in) | 35.7 |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | High Sanitation |
| Seat Material | 316 Stainless Steel |
| Series | 2150 HS |
| Standards Met | FDA Compliant Materials, EC 1935/2004 |
| Surface Finish | 32 Ra |
| Tri-Clamp Connection Size | 2-inch |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 111 |
| 5 | |
| 2150HS.PS01ASSASSPTPOEP21 | |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food, Personal Care |
| Compressor Required | Yes |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmould |
| Fluid Passage Size (in) | 2 |
| Fluid Passage Size (mm) | 50 |
| Fluid Section Material | 440C Stainless Steel |
| For Use With | Food, Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | Centre Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (cpm) | 135 |
| Maximum Flow Rate (l/min) | 681 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 1.27 |
| Maximum Solid Size (mm) | 12.7 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | High Sanitation |
| Seat Material | 316 Stainless Steel |
| Series | 2150 HS |
| Standards Met | FDA Compliant Materials, EC 1935/2004 |
| Surface Finish | 32 Ra |
| Tri-Clamp Connection Size | 2-inch |
| Type | Pneumatic Diaphragm Pump |
