Graco Inc.

Pro Xp60 Electrostatic Spray Guns  Electrostatic Air Spray Guns Deliver Expert Performance

Pro Xp60 kV electrostatic air spray gun is available in a variety of models for flexible manufacturing needs

Kust ostaTeabepäring
Jagamine |
Pro Xp60, 60 kV, Round Spray

Pro Xp60 Air Spray gun line includes Standard, Smart, High Conductivity, Round Spray and Waterborne models. The additional gun models combine the benefits of material savings and excellent finish quality into a smaller and lighter gun body, making it easier to spray.

  • The smallest profile gun with internal power supply on the market - 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter
  • Reduce muscle strain with the lighter trigger pull
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Made in the USA
  • Rugged, dependable design supported by a three year warranty
  • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

Juhendid

Kirjandus

Muud lugemismaterjalid

Kuva väärtused meetermõõdustikus.. Kuva väärtused inglise mõõdustikus..

Electrostatic Air Spray Guns
Maximum Working Fluid Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Paint Resistivity Range
3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
3/8 npsm(m)
3/8 npsm(m)
Output Voltage
Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
Maximum Current Draw
125 microamperes
125 microamperes
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A)at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A)at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Wetted Parts
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene