Graco Inc.

Pro Xp85 Electrostatic Spray Guns  Electrostatic Air Spray Guns Deliver Expert Performance

Pro Xp85 kV air spray gun maximizes transfer efficiency and lowers cost of ownership

Kust ostaTeabepäring
Jagamine |
Pro Xp85, 85 kV HC, Standard

The ergonomic design and effeciency of the Pro Xp85 makes it the perfect solution for your application - saving you money and improving quality. Pro Xp85 Air Spray electrostatic gun line includes Standard, Smart and High Conductivity models.

  • Electrostatic guns are easier to adjust with larger control knobs
  • Alternator speed indicator light ensures your turbine speed is running at the correct level
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Made in the USA
  • Internal power supply reduces operator fatigue with no heavy cords to slow you down
  • Rugged, dependable design supported by a three year warranty
  • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements.
Kuva väärtused meetermõõdustikus.. Kuva väärtused inglise mõõdustikus..

Electrostatic Air Spray Guns
Maximum Working Fluid Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Paint Resistivity Range
3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
3/8 npsm(m)
3/8 npsm(m)
Output Voltage
Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
Maximum Current Draw
125 microamperes
125 microamperes
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A)at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A)at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Wetted Parts
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene