Cart
Active Surge Suppressor
Part Number: 17W739
Image is for illustrative purposes only.
Active Surge Suppressor
Part Number: 17W739
Manufacturers concerned about paint line pulsation can set and forget the active surge suppressor. It automatically adjusts itself for peak performance in changing conditions. Once you have set it up, you can forget about manual adjustments.
Features
Product Brochure
Manufacturers concerned about paint line pulsation can set and forget the active surge suppressor. It automatically adjusts itself for peak performance in changing conditions. Once you have set it up, you can forget about manual adjustments.
- Works off piped compressed air, eliminating the need for and extra cost of high pressure charge air
- Flushes cleanly and thoroughly in between colours
- Saves space with pump-mount configuration
- Back-up seal keeps paint from leaking out in case of diaphragm rupture
Specifications & Documents
Technical Specifications
Convert to Imperial| Inlet Size (in) | 1-1/2 |
|---|---|
| Maximum Flow Rate (GPM) | "10 (single pump), 20 (E-flo DC 2X)" |
| Maximum Fluid Pressure (MPa) | 2.1 |
| Maximum Fluid Pressure (psi) | 300 |
| Outlet Size (in) | 1-1/2 |
| Type | Surge Tank |
| Wetted Material | Stainless Steel, PTFE |
| Inlet Size (cm) | 3.81 |
| Inlet Size (in) | 1-1/2 |
| Inlet Size (mm) | 38.1 |
| Maximum Flow Rate (L/min) | 76 |
| Maximum Fluid Pressure (MPa) | 2.1 |
| Maximum Fluid Pressure (bar) | 21 |
| Maximum Fluid Pressure (kPa) | 2100 |
| Maximum Fluid Pressure (psi) | 300 |
| Outlet Size (cm) | 3.81 |
| Outlet Size (in) | 1-1/2 |
| Outlet Size (mm) | 38.1 |
| Type | Surge Tank |
| Wetted Material | Stainless Steel, PTFE |
