QUANTM i30
QUANTM i30, 1"NPT, stainless steel electric diaphragm pump, a FluxCore drive, 120 VAC 1Φ, AL centre, TP seat, AC ball, TP diaphragm
Part Number: TE30-0363
QUANTM i30
QUANTM i30, 1"NPT, stainless steel electric diaphragm pump, a FluxCore drive, 120 VAC 1Φ, AL centre, TP seat, AC ball, TP diaphragm
Part Number: TE30-0363
Features
Product BrochureThe stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8 times more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimise downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework.
- Revolutionary design
- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- The patented FluxCore drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to an 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- FluxCore motor
- Powder-coated aluminium FluxCore drive
- 120 VAC 1Φ motor with 4.5 m (15 ft) flying leads
- CID1 groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval
- Construction materials
- Stainless steel fluid section with an NPT end port
- Internal components include a TPE (Hytrel) seat, TPE (Hytrel) ball, TPE (Hytrel) diaphragm and TPE (Hytrel) manifold O-ring
Specifications & Documents
Technical Specifications
Convert to ImperialQTC-SSFC6TPACTP--S100 | |
Application | Chemical processing, Paints & coatings, Waste water, General fluid transfer |
Ball Material | Acetal |
Centre Section Material | Aluminium |
Connection Type | NPT |
Cord Length (ft) | 15 |
Diaphragm Material | TPE (Hytrel) |
Fluid Inlet Size (in) | 1 |
Fluid Inlet Thread Gender | Female |
Fluid Inlet Thread Type | NPT |
Fluid Outlet Size (in) | 1 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Fluid Section Material | Stainless Steel |
Fluid passage size (in) | 1 |
Fluid passage size (mm) | 25 |
Fluid section | Stainless steel, end port, NPT |
Hazardous location approved | Class 1, Division 1, ATEX, IECEx |
Manifold Configuration | End Port |
Manifold O-Ring Material | TPE (Hytrel) |
Maximum Ambient Temperature (°F) | 104 |
Maximum Amperage (A) | 12 |
Maximum Flow Rate (GPM) | 30 |
Maximum Fluid Pressure (psi) | 100 |
Maximum Solid Size (in) | 0.125 |
Maximum fluid operating temperature (°C) | 66 |
Maximum fluid operating temperature (°F) | 150 |
Minimum fluid operating temperature (°C) | -29 |
Minimum fluid operating temperature (°F) | -20 |
Model | QUANTM |
Motor Type | Electric Drive |
Overall Height (in) | 13.7 |
Seat Material | TPE (Hytrel) |
Series | i30 |
Type | Electric Diaphragm Pump |
Voltage (V ac) | 100-120 VAC 1Ph |
Weight (lb) | 79 |
Wetted Material | 316 Stainless Steel, TPE (Hytrel), Acetal, TPE (Hytrel) |
QTC-SSFC6TPACTP--S100 | |
Application | Chemical processing, Paints & coatings, Waste water, General fluid transfer |
Ball Material | Acetal |
Centre Section Material | Aluminium |
Connection Type | NPT |
Cord Length (m) | 4.57 |
Diaphragm Material | TPE (Hytrel) |
Fluid Inlet Size (in) | 1 |
Fluid Inlet Size (mm) | 25.4 |
Fluid Inlet Thread Gender | Female |
Fluid Inlet Thread Type | NPT |
Fluid Outlet Size (in) | 1 |
Fluid Outlet Size (mm) | 25.4 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Fluid Section Material | Stainless Steel |
Fluid passage size (in) | 1 |
Fluid passage size (mm) | 25 |
Fluid section | Stainless steel, end port, NPT |
Hazardous location approved | Class 1, Division 1, ATEX, IECEx |
Manifold Configuration | End Port |
Manifold O-Ring Material | TPE (Hytrel) |
Maximum Amperage (A) | 12 |
Maximum Flow Rate (L/min) | 114 |
Maximum Fluid Pressure (bar) | 6.9 |
Maximum Fluid Pressure (kPa) | 690 |
Maximum Fluid Pressure (psi) | 100 |
Maximum Solid Size (mm) | 3.2 |
Maximum ambient temperature (°C) | 40 |
Maximum fluid operating temperature (°C) | 66 |
Maximum fluid operating temperature (°F) | 150 |
Minimum fluid operating temperature (°C) | -29 |
Minimum fluid operating temperature (°F) | -20 |
Model | QUANTM |
Motor Type | Electric Drive |
Seat Material | TPE (Hytrel) |
Series | i30 |
Type | Electric Diaphragm Pump |
Voltage (V ac) | 100-120 VAC 1Ph |
Wetted Material | 316 Stainless Steel, TPE (Hytrel), Acetal, TPE (Hytrel) |