Cart
E-Flo DCi 2-Ball
E-Flo DCi 2-Ball Electric Pump, 40:1, 180cc, 3 HP, 380-480 VAC 3 Phase, Stainless Steel Construction, Basic Controls, Stand Mount
Part Number: Y40BE1
Image is for illustrative purposes only.
E-Flo DCi 2-Ball
E-Flo DCi 2-Ball Electric Pump, 40:1, 180cc, 3 HP, 380-480 VAC 3 Phase, Stainless Steel Construction, Basic Controls, Stand Mount
Part Number: Y40BE1
Direct current (DC) supply pump with intelligent (i) control has a 180 cc volume per cycle range. The 2-ball lower attains a 40:1 equivalent pressure ratio.
Features
Direct current (DC) supply pump with intelligent (i) control has a 180 cc volume per cycle range. The 2-ball lower attains a 40:1 equivalent pressure ratio.
Electric piston pump supplies paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 3 horse power (HP) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- ATEX, IECEx, JPNEx, CCCEx and KCS certifications confirm safe operation worldwide.
- Wetted section has a stainless steel construction for durability.
- Basic controls integrate easily with the factory programmable logic controller (PLC); no variable frequency drive (VFD) is required.
- Floor stand has a compact footprint with a space-saving vertical design.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Supply |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 0.75 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Includes | Basic controls, floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 0.95 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 26.2 |
| Maximum Working Pressure (psi) | 3800 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Power Rating (HP) | 3 |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
| Application | Supply |
| Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 0.75 |
| Fluid Outlet Size (mm) | 19.1 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Includes | Basic controls, floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 3.5 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 26.2 |
| Maximum Working Pressure (bar) | 55115 |
| Maximum Working Pressure (kPa) | 26201 |
| Maximum Working Pressure (psi) | 3800 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
What's Included
| Part No. | Description | Qty | Unit |
|---|---|---|---|
| 236456 | Dura-Flo 750 (180 cc) Lower, SST, Severe-Duty Rod and Cylinder, 4 Leather/1 PTFE Backup Packings | 1 | ea |
