Graco Inc.

XM Plural-Component Sprayers  Discover the next evolution in plural-component spraying

High-pressure equipment for protective coatings

Σημεία πώλησηςΑίτημα πληροφοριών
Κοινή χρήση |

Precise ratio assurance in a fully configurable system

Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

At the heart of the ratio control is Graco's advanced dosing technology. The major component is constantly flowing while the minor component is injected at higher pressures. Advanced sensing technology allows pumps to compensate for pressure fluctuations, resulting in accurate, on-ratio mixing for better yield and less waste.

Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job. Start with a base unit. Then select the accessories you need. You get exactly what you need. No more. No less.

  • New dosing technology assures accurate, on-ratio mixing for better yield and less waste
  • Advanced, intuitive user controls provide real-time display of ratio
  • USB port lets you easily access and download historical spraying data
  • Supports multiple spray guns for added productivity
  • Allows for easy crane transport with eye hooks on air motors
  • Variable ratio system - handles material ratios from 1:1 to 10:1

Εγχειρίδια

Έντυπο υλικό

Άλλοι πόροι

Εμφάνιση μετρικών μονάδων μέτρησης. Εμφάνιση μονάδων μέτρησης Η.Π.Α..

XM Plural-Component Sprayers
Mixed Ratio Range
1:1-10:1 (in 0.1 increments)
1:1-10:1 (in 0.1 increments)
Ratio Tolerance Range (before alarm)
+/- 5%
+/- 5%
Minimum Flow Rate
1 qt/min
0.95 l/min
Maximum Flow Rate
3 gal/min
11.4 l/min
Fluid Viscosity Range
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
Fluid Filtration
60 mesh, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
Air Inlet
3/4 npt(f)
3/4 npt(f)
Fluid inlets without feed kits
1 1/4 npt(m)
1 1/4 npt(m)
50:1 Maximum Fluid Working Pressure of mixed material
5200 psi
35.8 MPa/358 bar
70:1 Maximum Fluid Working Pressure of mixed material
6300 psi
43.5 MPa/435 bar
Maximum Fluid Temperature
160° F
71° C
Air Supply Pressure Range
50-150 psi
0.35-1.0 MPa/3.5-10.3 bar
50:1 Maximum pump air set pressure
100 psi
0.70 MPa/7.0 bar
70:1 Maximum pump air set pressure
90 psi
0.62 MPa/6.2 bar
Maximum pump inlet fluid feed pressure
250 psi
1.7 MPa/17 bar
Maximum Air Consumption
70 scfm per gpm (at 100 psi in scfm)
1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min
Air Filtration
40 micron main filter, 5 micron control air filter
40 micron main filter, 5 micron control air filter
Ambient Operating Temperature Range
32 to 130° F
0 to 54° C
Ambient Storage Temperature Range
30 to160° F
-1 to 71° C
Environmental Conditions Rating
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 130° F, Pollution Degree (11), Installation category (2)
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2)
Sound Pressure
86 dBA at 100 psi
86 dBA at 0.7 MPa, 7 bar
Sound Power
98 dBA at 100 psi
98 dBA at 0.7 MPa, 7 bar
Weight
Base sprayer (XM1A00 and XM5A00 models) 742 lb (add component weights to base sprayer weight for your specific model weight)
Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight)
Wetted parts
Suction Tubes
Aluminum
Aluminum
Flush Pump
Carbide, PTFE, stainless steel, UHMWPE
Carbide, PTFE, stainless steel, UHMWPE
Hoses
Nylon
Nylon
Pumps (A and B)
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Metering Valves
Carbon Steel, nickel plating, carbide, polyethylene, leather
Carbon Steel, nickel plating, carbide, polyethylene, leather
Manifold
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Mixer
Stainless steel housing with acetal elements
Stainless steel housing with acetal elements