- Reduced material waste
- No more throwing away unused mixed material at the end of the day
- Save money by using less clean-up solvent
- Consistent material quality - no more guesswork or human error in measuring materials
- Easy to operate - minimal training required
- Reduced maintenance costs
- Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths
XP70 and XP70-hf Plural-Component Sprayers Two-component spraying made easy and affordable
High-pressure performance for two-part high-solids coatings
A smart alternative to hand mixing
The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent.
The XP-hf system combines the popular XP70 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear.
Engineered for more flow capacity, the Graco XP70-hf is great for applications where you want to spray with multiple guns or larger tip sizes.
Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
XP70-hf | XP70 | |
Typical Materials | High to 100% solids coatings | High to 100% solids coatings |
Max Fluid Pressure ratio dependant |
7100 - 7250 psi | 6800 - 7250 psi |
Flow Rate at 40 cpm approximate |
3 gallons / minute | 2 gallons / minute |
Hear what professionals have to say about XP-hf
Learn how to upgrade today!
Get more information on the XP70 and XP70-hf.
Switch from hand-mixing and see the benefits

Εγχειρίδια
- 309524Y, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English [άλλες γλώσσες]
- 312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English [άλλες γλώσσες]
- 3A0590P, Manual, Mix Manifold, Instructions, English [άλλες γλώσσες]
- 3A0420ZAF, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English [άλλες γλώσσες]
- 3A0421B, Manual, Ratio Check Kit, Instructions, English (Μόνο Αγγλικά)
- 309852E -Reactor Circulation and Return Tube Kits, English (Μόνο Αγγλικά)
- 310863P, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English [άλλες γλώσσες]
- 312456ZAH, Εγχειρίδιο, Κάτω αντλίες Xtreme, Οδηγίες–Κατάλογος εξαρτημάτων, Ελληνικά (noptc) [άλλες γλώσσες]
- 311486E, Manual, DataTrak Conversion Kit, Instructions, English [άλλες γλώσσες]
- 313656K, Συγκρότημα αντλίας Merkur, Οδηγίες - Εξαρτήματα, ελληνικά [άλλες γλώσσες]
- 312769F, Feed Pump Kits, XM, XP70, Instructions-Parts, US English (Μόνο Αγγλικά)
- 312747L - Double Wall Hopper, Instructions-Parts, English [άλλες γλώσσες]
- 3A1331J, XP Pressure Monitor Kit, Instructions-Parts, English [άλλες γλώσσες]
- 3A2573F - Gun Splitter Valve, Instructions-Parts, English (Μόνο Αγγλικά)
- 199349M, XP Plural-Component Sprayers, EU-Declaration of Conformity, English (Μόνο Αγγλικά)
- 3A3320H, Manual, XP and XP-hf PressureTrak Kit, Operations and Parts, English (Μόνο Αγγλικά)
- 3A4381K, XP-hf Proportioner Operation, Repair and Parts (English) [άλλες γλώσσες]
309524Y, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English
312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English
3A0590P, Manual, Mix Manifold, Instructions, English
3A0420ZAF, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English
310863P, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English
312456ZAH, Εγχειρίδιο, Κάτω αντλίες Xtreme, Οδηγίες–Κατάλογος εξαρτημάτων, Ελληνικά (noptc)
311486E, Manual, DataTrak Conversion Kit, Instructions, English
313656K, Συγκρότημα αντλίας Merkur, Οδηγίες - Εξαρτήματα, ελληνικά
312747L - Double Wall Hopper, Instructions-Parts, English
3A1331J, XP Pressure Monitor Kit, Instructions-Parts, English
Έντυπο υλικό
- 350210ENEU XP [άλλες γλώσσες]
- 349879ENEU XP-hf [άλλες γλώσσες]
- 348546A Graco XP Pressure Monitor Kit Flyer (English) (Μόνο Αγγλικά)
- 349666 ENEU PressureTrak [άλλες γλώσσες]
- 349329ENEU Parts & Accessories [άλλες γλώσσες]
- 349706ENEU Xtreme-Duty Agitator [άλλες γλώσσες]
349329ENEU Parts & Accessories
Άλλοι πόροι
XP and XP-h Proportioners | |
Maximum Fluid Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Maximum Air/Hydraulic Oil Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Combined Fluid Output (cc/cycle) | See Models section in instruction manual. See Models section in instruction manual. |
Pressure Ratio | See Models section in instruction manual. See Models section in instruction manual. |
Fluid Flow at 40 cpm | See Models section in instruction manual. See Models section in instruction manual. |
Hydraulic Fluid Consumption (XP-h models only) | 0.2 gallons per cycle 0.76 liters per cycle |
Air inlet size | 3/4 npsm(f) 3/4 npsm(f) |
Maximum air pressure supply to the system | 175 psi 12 bar, 1 MPa |
Fluid pump inlets without hoppers | 1-1/4 in. npsm(m) 1-1/4 in. npsm(m) |
Fluid gauge manifold outlets | 1/2 in. npt(f) 1/2 in. npt(f) |
Fluid mix manifold inlets | 1/2 in. npt(f) ball valves 1/2 in. npt(f) ball valves |
Mix manifold material outlet | 1/2 in. npt(f) 1/2 in. npt(f) |
Maximum feed pressure from remote source | 250 psi 17 bar, 1.7 MPa |
Sound pressure | 86 dBA at 100 psi 7 bar, 0.7 MPa |
Sound power | 98 dBA at 100 psi 7 bar, 0.7 MPa |
Maximum Storage Time | 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) |
Maximum Lifetime | Indefinite with recommended maintenance and periodic rebuilds for critical parts. Indefinite with recommended maintenance and periodic rebuilds for critical parts. |
Power Efficiency Factor (XP70) | 75 cu. ft compressed air/1 gallon sprayed material at 100 psi 2.12 m³ compressed air/1 liter sprayed material at 7 bar (0.7 MPa) |
Air consumption per 1 gallon (3.78 l) of flow | |
XP70 | 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) |
XP50 | 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) |
XP35 | 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) |
Filtration | |
Air inlet filtration | 40-micron filter/separator included 40-micron filter/separator included |
XP pump outlets | 30 mesh 30 mesh |
XTR Spray Gun | 60 mesh 60 mesh |
Fluid Viscosity Range | |
Gravity feed with 7 gallon (26 liter) hoppers | 200 to 20,000 cps (pourable) 200 to 20,000 cps (pourable) |
Pressure feed | Any viscosity that will not require feed pressure more than 15% of outlet pressure Any viscosity that will not require feed pressure more than 15% of outlet pressure |
Environmental Rating (Indoor/outdoor) | |
Hazardous Areas | EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. |
Ambient Temperature Range | |
Operating | 40-130°F 4-54°C |
Storage | 30-160°F -1-71°C |
Maximum Fluid Temperature | 160°F 71°C |
Wetted materials | |
Housings and manifolds | Carbon steel with electroless nickel plating Carbon steel with electroless nickel plating |
Miscellaneous parts | Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics |
Pump packings | Carbon filled PTFE, proprietary UHMWPE Carbon filled PTFE, proprietary UHMWPE |
Flush pump suction tube | Aluminum Aluminum |
Hoses | Nylon core Nylon core |
Weight | |
Full XP35, XP50, or XP70 System with heaters, solvent flush pump, and hoppers | 575 lb 261 kg |
Full XP-h System with heaters, solvent flush pump, and hoppers | 600 lb 273 kg |
Bare XP35, XP50, or XP70 system with no heaters, solvent flush pump, or hoppers | 425 lb 193 kg |
Bare XP-h System with no heaters, solvent flush pump, or hoppers | 450 lb 204 kg |
XP35, XP50, or XP70 Pump only | 286 lb 130 kg |
XP-h Pump only | 290 lb 132 kg |
-
Επικαλύψεις οροφών
-
Αντισκωριακή προστασία
-
Ναυπηγικές και θαλάσσιες εφαρμογές
-
Προστατευτικές επικαλύψεις γεφυρών
-
Κατασκευή και επισκευή βαγονιών
-
Towers for Wind Turbines
-
Επικάλυψη σωλήνων και δεξαμενών
-
Επικάλυψη δομικού χάλυβα
-
Προστατευτικές επικαλύψεις πύργων ύδρευσης
-
Επεξεργασία λυμάτων
-
Αποκατάσταση φρεατίων και υπονόμων
-
Πρόληψη διαρροών με δευτερεύον περίβλημα
-
Έλεγχος διάβρωσης
-
Θαλάσσιες εξέδρες
Παρελκόμενα
-
Gun Splitter
Lets you use two spray guns with one XP Sprayer
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Viscon Fluid Heaters
Provides excellent temperature conditioning for high solids coatings and high viscosity materials
-
XTR-5 and XTR-7
Airless spray guns for protective coatings
-
Xtreme-Duty Hose
For high-pressure spraying applications