Graco Inc.

ProMix 2KS 프로포셔너  전자식 전자식 이액형 시스템

광범위한 용제성, 수성 및 산성 촉매 도료에 적합한 전자식 프로포셔너

구매처정보 요청
공유 |

Graco의 2액 및 3액 성분 프로포셔너는 광범위한 용제성, 수성 및 산성 촉매 도료에 대한 정확하며 신뢰할 수 있는 전자식 복수 성분 프로포셔너입니다. 기본형에서 업그레이드 용도에 이르기까지 ProMix 2KS 및 3KS 시스템은 유연성과 효율 향상을 제공합니다.

  • 최고 수준의 배합비를 보장
  • 중요한 프로세스 변수에 대한 피드백을 제공
  • 내장 시스템 안전장치
  • 효과적인 컬러 변환 솔루션
  • 효율적인 도료 추적 및 보고

Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts. 

ProMix 2KS Wall Panel, 50 cc
  • 수동 및 자동 구성
  • 위험 구역에 간편하게 통합할 수 있는 본질적으로 안전한 유체 패널
  • 단일 또는 다중 색상 및 촉매
  • 정확한 비율 보장으로 탁월한 마감 품질
  • 간단한 프로그래밍으로 신속한 설정 및 효율적인 프로세스 제어가 가능
  • 통합 시스템 관리 및 보고 기능을 제공하는 고급 웹 인터페이스

매뉴얼

자료

기타 자원

측정 단위로 값 보기. 미국 달러로 가격 보기.

ProMix 2KS Manual System
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–50:1
0.1:1–50:1
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
4000 psi
280 bar, 28 MPa
Low pressure color change
300 psi
21 bar, 2.1 MPa
High pressure color change
3000 psi
210 bar, 21 MPa
Coriolis Meter
2300 psi
161 bar, 16.1 MPa
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
1/4 npt(f)
Fluid Outlet Size (static mixer)
1/4 npt(f)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix 2KS Automatic System
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–50:1
0.1:1–50:1
On-ratio accuracy
up to +/- 1%, user selectable
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
4000 psi
275.8 bar, 27.58 MPa
Low pressure color change
300 psi
20.6 bar, 2.07 MPa
Coriolis Meter
2300 psi
158.6 bar, 15.86 MPa
RoboMix system
190 psi
13.1 bar, 1.31 MPa
Flow control
190 psi
13.1 bar, 1.31 MPa
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
1/4 npt(f)
Fluid Outlet Size (static mixer)
1/4 npt(f)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA