- Reduced material waste
- No more throwing away unused mixed material at the end of the day
- Save money by using less clean-up solvent
- Consistent material quality - no more guesswork or human error in measuring materials
- Easy to operate - minimal training required
- Reduced maintenance costs
- Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths
XP50 and XP50-hf Plural-Component Sprayer Two-component spraying made easy and affordable
For higher-volume protective coatings
A smart alternative to hand mixing
Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. When you upgrade from hand mixing, you'll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent.
The XP-hf system combines the XP50 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear.
Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
XP50-hf | XP50 | |
Typical Materials | Medium to high-solids coatings | Medium to high-solids coatings |
Max Fluid Pressure ratio dependant |
4750 - 5000 psi | 4500 - 5500 psi |
Flow Rate at 40 cpm approximate |
3 gallons / minute | 4 gallons / minute |
Hear what professionals have to say about XP-hf
Learn how to upgrade today!
Get more information on the XP50 and XP50-hf.
Switch from hand-mixing and see the benefits

Navodila za uporabo
- 309524Z, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English [drugi jeziki]
- 312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English [drugi jeziki]
- 3A0590P, Manual, Mix Manifold, Instructions, English [drugi jeziki]
- 3A0420ZAG, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English [drugi jeziki]
- 3A0421B, Manual, Ratio Check Kit, Instructions, English (Samo v angleščini)
- 309852E -Reactor Circulation and Return Tube Kits, English (Samo v angleščini)
- 310863R, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English [drugi jeziki]
- 311762ZAL, Manual, Xtreme Lowers, Instructions-Parts, English [drugi jeziki]
- 311486E, Manual, DataTrak Conversion Kit, Instructions, English [drugi jeziki]
- 312794L, Manual, Merkur Pump Assembly, Instructions and Parts, English [drugi jeziki]
- 312769G, Feed Pump Kits, XM, XP70, Instructions, English (Samo v angleščini)
- 312747L - Double Wall Hopper, Instructions-Parts, English [drugi jeziki]
- 3A1331K, Manual, XP Pressure Monitor Kit, Instructions-Parts, English [drugi jeziki]
- 199349P, XP Plural-Component Sprayers, EU-Declaration of Conformity (Samo v angleščini)
- 3A3320J, Manual, XP and XP-hf PressureTrak Kit, Operations and Parts, English (Samo v angleščini)
309524Z, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English
312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English
3A0590P, Manual, Mix Manifold, Instructions, English
3A0420ZAG, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English
310863R, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English
311762ZAL, Manual, Xtreme Lowers, Instructions-Parts, English
311486E, Manual, DataTrak Conversion Kit, Instructions, English
312794L, Manual, Merkur Pump Assembly, Instructions and Parts, English
312747L - Double Wall Hopper, Instructions-Parts, English
Literatura
- 350210ENEU, XP [drugi jeziki]
- 349879ENEU XP-hf [drugi jeziki]
- 348546EN, Graco XP Pressure Monitor Kit Flyer (Samo v angleščini)
- 349666ENEU, PressureTrak [drugi jeziki]
- 349329ENEU, Parts & Accessories [drugi jeziki]
- 349706ENEU, Xtreme-Duty Agitator [drugi jeziki]
- 300738ENEU SHIP & RIG BUILDING [drugi jeziki]
349329ENEU, Parts & Accessories
349706ENEU, Xtreme-Duty Agitator
XP and XP-h Proportioners | |
Maximum Fluid Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Maximum Air/Hydraulic Oil Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Combined Fluid Output (cc/cycle) | See Models section in instruction manual. See Models section in instruction manual. |
Pressure Ratio | See Models section in instruction manual. See Models section in instruction manual. |
Fluid Flow at 40 cpm | See Models section in instruction manual. See Models section in instruction manual. |
Hydraulic Fluid Consumption (XP-h models only) | 0.2 gallons per cycle 0.76 liters per cycle |
Air inlet size | 3/4 npsm(f) 3/4 npsm(f) |
Maximum air pressure supply to the system | 175 psi 12 bar, 1 MPa |
Fluid pump inlets without hoppers | 1-1/4 in. npsm(m) 1-1/4 in. npsm(m) |
Fluid gauge manifold outlets | 1/2 in. npt(f) 1/2 in. npt(f) |
Fluid mix manifold inlets | 1/2 in. npt(f) ball valves 1/2 in. npt(f) ball valves |
Mix manifold material outlet | 1/2 in. npt(f) 1/2 in. npt(f) |
Maximum feed pressure from remote source | 250 psi 17 bar, 1.7 MPa |
Sound pressure | 86 dBA at 100 psi 7 bar, 0.7 MPa |
Sound power | 98 dBA at 100 psi 7 bar, 0.7 MPa |
Maximum Storage Time | 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) |
Maximum Lifetime | Indefinite with recommended maintenance and periodic rebuilds for critical parts. Indefinite with recommended maintenance and periodic rebuilds for critical parts. |
Power Efficiency Factor (XP70) | 75 cu. ft compressed air/1 gallon sprayed material at 100 psi 2.12 m³ compressed air/1 liter sprayed material at 7 bar (0.7 MPa) |
Air consumption per 1 gallon (3.78 l) of flow | |
XP70 | 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) |
XP50 | 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) |
XP35 | 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) |
Filtration | |
Air inlet filtration | 40-micron filter/separator included 40-micron filter/separator included |
XP pump outlets | 30 mesh 30 mesh |
XTR Spray Gun | 60 mesh 60 mesh |
Fluid Viscosity Range | |
Gravity feed with 7 gallon (26 liter) hoppers | 200 to 20,000 cps (pourable) 200 to 20,000 cps (pourable) |
Pressure feed | Any viscosity that will not require feed pressure more than 15% of outlet pressure Any viscosity that will not require feed pressure more than 15% of outlet pressure |
Environmental Rating (Indoor/outdoor) | |
Hazardous Areas | EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. |
Ambient Temperature Range | |
Operating | 40-130°F 4-54°C |
Storage | 30-160°F -1-71°C |
Maximum Fluid Temperature | 160°F 71°C |
Wetted materials | |
Housings and manifolds | Carbon steel with electroless nickel plating Carbon steel with electroless nickel plating |
Miscellaneous parts | Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics |
Pump packings | Carbon filled PTFE, proprietary UHMWPE Carbon filled PTFE, proprietary UHMWPE |
Flush pump suction tube | Aluminum Aluminum |
Hoses | Nylon core Nylon core |
Weight | |
Full XP35, XP50, or XP70 System with heaters, solvent flush pump, and hoppers | 575 lb 261 kg |
Full XP-h System with heaters, solvent flush pump, and hoppers | 600 lb 273 kg |
Bare XP35, XP50, or XP70 system with no heaters, solvent flush pump, or hoppers | 425 lb 193 kg |
Bare XP-h System with no heaters, solvent flush pump, or hoppers | 450 lb 204 kg |
XP35, XP50, or XP70 Pump only | 286 lb 130 kg |
XP-h Pump only | 290 lb 132 kg |
-
Premaz za strehe
-
Zaščita proti rji
-
Ladjedelništvo in pomorstvo
-
Zaščitni premazi za mostove
-
Izdelava in popravila železniških vozil
-
Towers for Wind Turbines
-
Premazovanje cevi in rezervoarjev
-
Premazovanje jeklenih konstrukcij
-
Zaščitni premazi za vodne stolpe
-
Obdelava odpadne vode
-
Obnova vstopnih jaškov in kanalizacije
-
Preprečevanje razlitja iz sekundarnih zadrževalnih sistemov
-
Protikorozijska zaščita
-
Naftne ploščadi
Dodatna oprema
-
Gun Splitter
Lets you use two spray guns with one XP Sprayer
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Viscon Fluid Heaters
Provides excellent temperature conditioning for high solids coatings and high viscosity materials
-
XTR-5 and XTR-7
Airless spray guns for protective coatings
-
Xtreme-Duty Hose
For high-pressure spraying applications