- Reduced material waste
- No more throwing away unused mixed material at the end of the day
- Save money by using less clean-up solvent
- Consistent material quality - no more guesswork or human error in measuring materials
- Easy to operate - minimal training required
- Reduced maintenance costs
- Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths
XP50 and XP50-hf Plural-Component Sprayer Two-component spraying made easy and affordable
For higher-volume protective coatings
A smart alternative to hand mixing
Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. When you upgrade from hand mixing, you'll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent.
The XP-hf system combines the XP50 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear.
Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
XP50-hf | XP50 | |
Typical Materials | Medium to high-solids coatings | Medium to high-solids coatings |
Max Fluid Pressure ratio dependant |
4750 - 5000 psi | 4500 - 5500 psi |
Flow Rate at 40 cpm approximate |
3 gallons / minute | 4 gallons / minute |
Hear what professionals have to say about XP-hf
Learn how to upgrade today!
Get more information on the XP50 and XP50-hf.
Switch from hand-mixing and see the benefits

Príručky
- 309524Z, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English [iné jazyky]
- 312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English [iné jazyky]
- 3A0590P, Manual, Mix Manifold, Instructions, English [iné jazyky]
- 3A0420ZAG, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English [iné jazyky]
- 3A0421B, Manual, Ratio Check Kit, Instructions, English (Len anglicky)
- 309852E -Reactor Circulation and Return Tube Kits, English (Len anglicky)
- 310863R, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English [iné jazyky]
- 3A1488ZAK, Príručka, Distribučné jednotky Xtreme, Pokyny–zoznam súčastí, Slovenský (noptc) [iné jazyky]
- 311486E, Manual, DataTrak Conversion Kit, Instructions, English [iné jazyky]
- 312794L, Manual, Merkur Pump Assembly, Instructions and Parts, English [iné jazyky]
- 312769G, Feed Pump Kits, XM, XP70, Instructions, English (Len anglicky)
- 312747L - Double Wall Hopper, Instructions-Parts, English [iné jazyky]
- 3A1331K, Manual, XP Pressure Monitor Kit, Instructions-Parts, English [iné jazyky]
- 199349P, XP Plural-Component Sprayers, EU-Declaration of Conformity (Len anglicky)
- 3A3320J, Manual, XP and XP-hf PressureTrak Kit, Operations and Parts, English (Len anglicky)
309524Z, Viscon HP High Pressure Fluid Heater, Instructions, Parts, English
312145K, XTR 5 and XTR 7 Airless Spray Gun, Instructions, Parts, English
3A0590P, Manual, Mix Manifold, Instructions, English
3A0420ZAG, Manual, XP and XP-h Proportioners Operation, Repair, and Parts, English
310863R, Manual, Feed and Solvent Flush Kits, Instructions and Parts, English
3A1488ZAK, Príručka, Distribučné jednotky Xtreme, Pokyny–zoznam súčastí, Slovenský (noptc)
311486E, Manual, DataTrak Conversion Kit, Instructions, English
312794L, Manual, Merkur Pump Assembly, Instructions and Parts, English
312747L - Double Wall Hopper, Instructions-Parts, English
Dokumenty
- 350210ENEU, XP [iné jazyky]
- 349879ENEU XP-hf [iné jazyky]
- 348546EN, Graco XP Pressure Monitor Kit Flyer (Len anglicky)
- 349666ENEU, PressureTrak [iné jazyky]
- 349329ENEU, Parts & Accessories [iné jazyky]
- 349706ENEU, Xtreme-Duty Agitator [iné jazyky]
- 300738ENEU SHIP & RIG BUILDING [iné jazyky]
349329ENEU, Parts & Accessories
349706ENEU, Xtreme-Duty Agitator
XP and XP-h Proportioners | |
Maximum Fluid Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Maximum Air/Hydraulic Oil Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
Combined Fluid Output (cc/cycle) | See Models section in instruction manual. See Models section in instruction manual. |
Pressure Ratio | See Models section in instruction manual. See Models section in instruction manual. |
Fluid Flow at 40 cpm | See Models section in instruction manual. See Models section in instruction manual. |
Hydraulic Fluid Consumption (XP-h models only) | 0.2 gallons per cycle 0.76 liters per cycle |
Air inlet size | 3/4 npsm(f) 3/4 npsm(f) |
Maximum air pressure supply to the system | 175 psi 12 bar, 1 MPa |
Fluid pump inlets without hoppers | 1-1/4 in. npsm(m) 1-1/4 in. npsm(m) |
Fluid gauge manifold outlets | 1/2 in. npt(f) 1/2 in. npt(f) |
Fluid mix manifold inlets | 1/2 in. npt(f) ball valves 1/2 in. npt(f) ball valves |
Mix manifold material outlet | 1/2 in. npt(f) 1/2 in. npt(f) |
Maximum feed pressure from remote source | 250 psi 17 bar, 1.7 MPa |
Sound pressure | 86 dBA at 100 psi 7 bar, 0.7 MPa |
Sound power | 98 dBA at 100 psi 7 bar, 0.7 MPa |
Maximum Storage Time | 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) |
Maximum Lifetime | Indefinite with recommended maintenance and periodic rebuilds for critical parts. Indefinite with recommended maintenance and periodic rebuilds for critical parts. |
Power Efficiency Factor (XP70) | 75 cu. ft compressed air/1 gallon sprayed material at 100 psi 2.12 m³ compressed air/1 liter sprayed material at 7 bar (0.7 MPa) |
Air consumption per 1 gallon (3.78 l) of flow | |
XP70 | 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) |
XP50 | 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) |
XP35 | 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) |
Filtration | |
Air inlet filtration | 40-micron filter/separator included 40-micron filter/separator included |
XP pump outlets | 30 mesh 30 mesh |
XTR Spray Gun | 60 mesh 60 mesh |
Fluid Viscosity Range | |
Gravity feed with 7 gallon (26 liter) hoppers | 200 to 20,000 cps (pourable) 200 to 20,000 cps (pourable) |
Pressure feed | Any viscosity that will not require feed pressure more than 15% of outlet pressure Any viscosity that will not require feed pressure more than 15% of outlet pressure |
Environmental Rating (Indoor/outdoor) | |
Hazardous Areas | EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. |
Ambient Temperature Range | |
Operating | 40-130°F 4-54°C |
Storage | 30-160°F -1-71°C |
Maximum Fluid Temperature | 160°F 71°C |
Wetted materials | |
Housings and manifolds | Carbon steel with electroless nickel plating Carbon steel with electroless nickel plating |
Miscellaneous parts | Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics |
Pump packings | Carbon filled PTFE, proprietary UHMWPE Carbon filled PTFE, proprietary UHMWPE |
Flush pump suction tube | Aluminum Aluminum |
Hoses | Nylon core Nylon core |
Weight | |
Full XP35, XP50, or XP70 System with heaters, solvent flush pump, and hoppers | 575 lb 261 kg |
Full XP-h System with heaters, solvent flush pump, and hoppers | 600 lb 273 kg |
Bare XP35, XP50, or XP70 system with no heaters, solvent flush pump, or hoppers | 425 lb 193 kg |
Bare XP-h System with no heaters, solvent flush pump, or hoppers | 450 lb 204 kg |
XP35, XP50, or XP70 Pump only | 286 lb 130 kg |
XP-h Pump only | 290 lb 132 kg |
-
Strešné náterové hmoty
-
Ochrana proti hrdzi
-
Stavba lodí a námorná doprava
-
Ochranné nátery mostov
-
Výroba a opravy koľajových vozidiel
-
Towers for Wind Turbines
-
Nátery potrubí a nádrží
-
Nátery stavebnej ocele
-
Ochranné nátery vodárenských veží
-
Čistenie odpadových vôd
-
Opravy prielezov a kanalizácií
-
Sekundárna prevencia úniku
-
Protikorózna ochrana
-
Ropné plošiny
Príslušenstvo
-
Gun Splitter
Lets you use two spray guns with one XP Sprayer
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Viscon Fluid Heaters
Provides excellent temperature conditioning for high solids coatings and high viscosity materials
-
XTR-5 and XTR-7
Airless spray guns for protective coatings
-
Xtreme-Duty Hose
For high-pressure spraying applications