Hot Melt Pattern Controller Precise Pattern Dispense for Therm-o-Flow and InvisiPac Applications
Control your adhesive pattern to reduce costs and improve system performance.
Increase productivity and reduce adhesive waste
Fast setup, easy programming and less adhesive – it all adds up to increase productivity with flexibility to adapt when you need it.
Easy Pattern Setup
- See pattern definitions all on one page for a comprehensive view
- Eliminate the guesswork of pattern setup with on-screen pattern preview
- Copy, delete or name patterns so you can change quickly and keep your line running
- Clone one gun sequence to another when all you need is to repeat the job
- Save time by inserting or deleting beads without editing the rest of the pattern
Stitching
- Save on adhesive consumption by changing solid beads to stitched beads
- Easily stitch individual beads or the entire pattern
- Turn stitching on or off with the push of a button
Operating modes
- Match adhesive output with line speed – put down less at slow speeds and more at high speeds – the right amount when and where you want it
- Time-based – for those cases where all you need is simple pattern control
- Distance-based at a fixed line speed or with an encoder – for when you need precise control or when you want to adjust to changing line speeds
- Not sure? Switch between modes without changing the program!
"50% glue savings is awesome and programming is unbelievably easy."
- North American kitted cabinet manufacturer
Ръководства за експлоатация
Литература
Други източници
Преглед на стойностите в метрични мерни единици.
Преглед на стойностите в американски мерни единици.
InvisiPac Pattern Controller | |
Input Power (External models only) | 100–240 VAC, 50/60 Hz, 2A max 100–240 VAC, 50/60 Hz, 2A max |
Gun Outputs (24 VDC, 1A each, 6A max total) | Value = 8 Value = 8 |
Total Gun Wattage (internal models) | 90 W 90 W |
Total Gun Wattage (external models) | 150 W 150 W |
Trigger Inputs (NPN or PNP or Dry Contact) | Value = 4 Value = 4 |
Trigger Excitation | 24 VDC 24 VDC |
Encoder (Quadrature differential line driver) | Value = 2 (PC-8e only) Value = 2 (PC-8e only) |
Encoder Excitation | 15 VDC 15 VDC |
Run Up Control [I/P (4–20mA) or V/P (0–10V)] | Value = 2 (PC-8e only) Value = 2 (PC-8e only) |
Run Up Excitation | 24 VDC 24 VDC |
PLC Enable/Disable (0–30 VDC, min 10V to assert) | Value = YES Value = YES |
PLC Program Select Bit (Select up to 15 unique programs) | Value = 4 Value = 4 |
PLC Alarm Output (0–250 VAC (dry contact input)) | Value = YES Value = YES |
Integrated Power Supply 24 VDC, 120 W (internal models) | Value = YES Value = YES |
Value = YES | |
Program Storage | 50 50 |
Beads Per Output (Each bead can be stitched, allowing many more than 24 dots) | Value = 24 Value = 24 |
Distance Accuracy | 0.1 in. 1 mm |
Time Accuracy | 1 ms 1 ms |
Enclosure Environmental Rating (Resistant to dust and splashing water) | Value = IP54 Value = IP54 |
Ambient Temperature | 32˚ – 120˚ F 0˚ – 50˚ C |
Trigger Specifications (Kit 24X446) | |
Sensor Type | Diffuse Diffuse |
Excitation | 10 – 30 VDC 10 – 30 VDC |
Sensing range | 7.87 in. 200 mm |
Output type | NPN/PNP NPN/PNP |
Trigger Specifications (Kit 24X447) | |
Sensor Type | Retro-reflective Retro-reflective |
Excitation | 10 – 30 VDC 10 – 30 VDC |
Sensing range | 16.4 ft 5.0 m |
Output type | NPN/PNP NPN/PNP |
Encoder Specifications (Kit 24X448) | |
Excitation | 10 – 30 VDC 10 – 30 VDC |
Pulses per revolution | 1000 1000 |
Output type | 5 VDC (TTL/RS422), Differential Line Driver 5 VDC (TTL/RS422), Differential Line Driver |
Run Up Specifications (Kit 17E020) | |
Excitation | 21.6 – 26.4 VDC 21.6 – 26.4 VDC |
Control Voltage | 0 – 10 VDC 0 – 10 VDC |