ToughTek M680a
ToughTek M680a Piston Pump Package, HTX 680 Applicator, Stainless Steel Hopper
262909



ToughTek M680a
ToughTek M680a Piston Pump Package, HTX 680 Applicator, Stainless Steel Hopper
262909
The ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials, and tackles difficult polymers with fillers such as glass flake, silica or sand. The all stainless design makes clean-u...
More InfoFeatures
Product BrochureThe ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials, and tackles difficult polymers with fillers such as glass flake, silica or sand. The all stainless design makes clean-up of epoxy mortars easy and worry-free.
Portable sprayer for mortar, cementitious and heavily filled materials
Primary features:
- Low pressure pumping (13.7 to 34.5 bar/200 to 500 psi) reduces wear on pump lower
- Less material waste and more consistent finish than hand-trowling
- Fast, easy cleaning with high velocity flush
- Can be quickly disassembled for hand cleaning
- Explosion-proof for hazardous spray areas
- One convenient air source to run pump and atomise air
Flex Hose Applicator
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T947
Pole Applicator
- For hard to reach areas
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T946
HTX 680 Applicator
- Good for lighter materials that do not typically pack out
- Includes Round Pattern Nozzles; provides a medium round pattern texture finish
- Air mixed into fluid through multiple venturi ports provides a consistent pattern
- Gives a more controlled pattern for lightweight materials or high solids coatings
- Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
- Order part number 24U209
Large Capacity Hopper
- 95 L (25 gal) hopper kit
- Ideal for materials that require more than 38 litre/10 gal capacity, such as fireproofing
- Boost productivity by minimising refills
- Easily connects to ToughTek M680a
- Easy to connect and manoeuvre
- Order part number 24W889
Specifications & Documents
Technical Specifications
Convert to ImperialApplication | Industrial |
---|---|
Compatible Material | Cementitious Material |
Fluid Inlet Thread Gender | Male |
Fluid Outlet Size (in) | 1 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Material | Stainless Steel |
Maximum Operating Temperature (°F) | 120 |
Maximum Working Pressure (MPa) | 7 |
Maximum Working Pressure (psi) | 1000 |
Motor Type | Pneumatic |
Series | M680a |
Type | Pneumatic Piston Pump Package |
Application | Industrial |
Compatible Material | Cementitious Material |
Fluid Inlet Thread Gender | Male |
Fluid Outlet Size (cm) | 2.54 |
Fluid Outlet Size (mm) | 25.4 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Material | Stainless Steel |
Maximum Working Pressure (MPa) | 7 |
Maximum Working Pressure (bar) | 70 |
Maximum Working Pressure (kPa) | 7000 |
Motor Type | Pneumatic |
Series | M680a |
Type | Pneumatic Piston Pump Package |