Cart
RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 214
Part Number: FFLP214
RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 214
Part Number: FFLP214
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 10-15 cm (4 to 6 in.) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
Features
Product Brochure
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 10-15 cm (4 to 6 in.) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
For fine finish applications
- Less Prep & Clean-up Time
- Less mess with less overspray
- Put the paint where you want it
- Easiest Pattern Overlap
- Softer spray fan pattern
- Easy to apply any material to any surface
- Consistent blended finish quality
- Extended Life
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- SmartTip Technology
- Exclusive internal tip geometry
- Reduces energy required to atomise paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Best Tip on the Market
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
- Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints |
|---|---|
| Fluid Orifice Size (in) | 0.014 |
| For Use With | RAC X HandTite Tip Guard |
| Material | Tungsten Carbide |
| Maximum Fan Width (in) | 4 |
| Maximum Flow Rate (GPM) | 0.21 |
| Maximum Working Pressure (psi) | 4050 |
| Minimum Fan Width (in) | 4 |
| Model | RAC X |
| Series | FF LP SwitchTip |
| Spray Pattern | Fan |
| Tip Type | Airless |
| Type | Spray tip |
| Compatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints |
| Fluid Orifice Size (in) | 0.014 |
| For Use With | RAC X HandTite Tip Guard |
| Material | Tungsten Carbide |
| Maximum Fan Width (cm) | 10 |
| Maximum Fan Width (in) | 4 |
| Maximum Fan Width (mm) | 152 |
| Maximum Flow Rate (L/min) | 0.79 |
| Maximum Working Pressure (bar) | 280 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Minimum Fan Width (mm) | 102 |
| Model | RAC X |
| Pattern Size (mm) | 101.6 to 152.4 |
| Series | FF LP SwitchTip |
| Spray Pattern | Fan |
| Tip Type | Airless |
| Type | Spray tip |
Product Manuals
