RAC X FF LP SwitchTip

Fine Finish Low Pressure RAC X FF LP SwitchTip, 514

Part Number: FFLP514

product image product image

RAC X FF LP SwitchTip

Fine Finish Low Pressure RAC X FF LP SwitchTip, 514

Part Number: FFLP514

Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 514 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 25-30 cm (10 to 12 in.) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 514 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 25-30 cm (10 to 12 in.) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.

For fine finish applications

  • Less Prep & Clean-up Time
    • Less mess with less overspray
    • Put the paint where you want it
  • Easiest Pattern Overlap
    • Softer spray fan pattern
    • Easy to apply any material to any surface
    • Consistent blended finish quality
  • Extended Life
    • Spraying at half pressure doubles tip life
    • Reduced sprayer maintenance – up to 2X life
  • SmartTip Technology
    • Exclusive internal tip geometry
    • Reduces energy required to atomise paints, stains, and other materials
    • Delivers a superior finish with less pressure
    • Works with SmartControl on select Graco sprayers
  • Best Tip on the Market
    • Works with any airless sprayer
    • Longest lasting fan pattern
    • Highest quality finish with a consistent spray pattern
  • Easy to Identify Tip Size
    • Large raised tip size numbers are always legible – even when covered with paint
  • Superior Tip Design
    • Locking tab ensures tip stays securely in guard
    • Snaps tip in spray or reverse position
    • OneSeal tip gasket installs with no tools
    • Solvent seal available when using extremely hot solvents

Specifications & Documents

Technical Specifications

Convert to Imperial
Compatible Material Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints
Fluid Orifice Size (in) 0.014
For Use With RAC X HandTite Tip Guard
Material Tungsten Carbide
Maximum Fan Width (in) 10
Maximum Flow Rate (GPM) 0.21
Maximum Working Pressure (psi) 4050
Minimum Fan Width (in) 10
Model RAC X
Series FF LP SwitchTip
Spray Pattern Fan
Tip Type Airless
Type Spray tip
Compatible Material Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints
Fluid Orifice Size (in) 0.014
For Use With RAC X HandTite Tip Guard
Material Tungsten Carbide
Maximum Fan Width (cm) 25
Maximum Fan Width (in) 10
Maximum Fan Width (mm) 305
Maximum Flow Rate (L/min) 0.79
Maximum Working Pressure (bar) 280
Maximum Working Pressure (kPa) 28000
Maximum Working Pressure (psi) 4050
Minimum Fan Width (mm) 254
Model RAC X
Pattern Size (mm) 254 to 304.8
Series FF LP SwitchTip
Spray Pattern Fan
Tip Type Airless
Type Spray tip

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco