RAC X LP SwitchTip
Low Pressure RAC X LP SwitchTip, 725
Part Number: LP725
 
                    
                    
                
                    
                         
                    
                    
                
                
            RAC X LP SwitchTip
Low Pressure RAC X LP SwitchTip, 725
Part Number: LP725
                    Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 725 Low Pressure (LP) RAC X SwitchTip. This low pressure, high production tip produces a 35-40 cm (14 to 16 in.) pattern and a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
                    
                
                
                
                    
                    
    
    
    
    
    
    
                
            Features
Product Brochure
                            Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 725 Low Pressure (LP) RAC X SwitchTip. This low pressure, high production tip produces a 35-40 cm (14 to 16 in.) pattern and a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
                        
                        For large surface areas such as walls, ceilings and floors
- Less Prep & Clean-up Time- Less mess with less overspray
- Put the paint where you want it
 
- Easiest Pattern Overlap- Softer spray fan pattern
- Easy to apply any material to any surface
- Consistent blended finish quality
 
- Extended Life- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
 
- SmartTip Technology- Exclusive internal tip geometry
- Reduces energy required to atomise paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
 
- Best Tip on the Market- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
 
- Easy to Identify Tip Size- Large raised tip size numbers are always legible – even when covered with paint
 
- Superior Tip Design- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
 
Specifications & Documents
Technical Specifications
Convert to Imperial| Fluid Orifice Size (in) | 0.025 | 
|---|---|
| For Use With | RAC X HandTite Tip Guard | 
| Maximum Fan Width (in) | 14 | 
| Maximum Flow Rate (GPM) | 0.67 | 
| Maximum Working Pressure (psi) | 4050 | 
| Minimum Fan Width (in) | 14 | 
| Model | RAC X | 
| Series | LP SwitchTip | 
| Type | Spray tip | 
| Fluid Orifice Size (in) | 0.025 | 
| For Use With | RAC X HandTite Tip Guard | 
| Maximum Fan Width (cm) | 35 | 
| Maximum Fan Width (in) | 14 | 
| Maximum Fan Width (mm) | 406 | 
| Maximum Flow Rate (L/min) | 2.54 | 
| Maximum Working Pressure (bar) | 280 | 
| Maximum Working Pressure (kPa) | 28000 | 
| Minimum Fan Width (mm) | 356 | 
| Model | RAC X | 
| Series | LP SwitchTip | 
| Type | Spray tip |