Cart
E-Flo DC 2-Ball
E-Flo DC 2-Ball Electric Supply Pump, 145 cc, 2 HP, Basic Controls, ATEX/FM/IECEx, Dura-Flo Lower, Stand
Part Number: ES7361
Image is for illustrative purposes only.
E-Flo DC 2-Ball
E-Flo DC 2-Ball Electric Supply Pump, 145 cc, 2 HP, Basic Controls, ATEX/FM/IECEx, Dura-Flo Lower, Stand
Part Number: ES7361
Our 2-ball supply pump is for applications requiring high pressure, up to 206 bar (3000 psi). In addition, the minimal pulsation at changeover provides a more consistent finish.
Features
Product Brochure
Our 2-ball supply pump is for applications requiring high pressure, up to 206 bar (3000 psi). In addition, the minimal pulsation at changeover provides a more consistent finish.
- Five times more efficient than similar-sized pneumatic pumps
- Operate the pump two different ways – constant pressure or constant flow rate
- Quiet electric motor improves your work environment, allowing you to remain near the pump for longer periods of time
- Minimal pulsation at changeover provides a more consistent finish
- Integrated runaway protection protects your pump from premature wear and prevents costly material loss
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Supply |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| For Use With | E-Flo DC Motor |
| Includes | Basic Controls, PTFE/Leather Packings, Stand |
| Input Voltage (V ac) | 200-250 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 0.77 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 21 |
| Maximum Working Pressure (psi) | 3040 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Power Rating (HP) | 2 |
| Series | DC 2-Ball |
| Type | Electric Piston Pump |
| Application | Supply |
| Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Size (mm) | 19.05 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| For Use With | E-Flo DC Motor |
| Includes | Basic Controls, PTFE/Leather Packings, Stand |
| Input Voltage (V ac) | 200-250 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 2.91 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 21 |
| Maximum Working Pressure (bar) | 210 |
| Maximum Working Pressure (kPa) | 21000 |
| Maximum Working Pressure (psi) | 3040 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | BLDC |
| Portable | Non-Portable |
| Series | DC 2-Ball |
| Type | Electric Piston Pump |
