ProGuard+ Automatic Voltage Switch
For the protection of Graco electrical equipment against voltage fluctuations
ProGuard+ is designed to protect your 240V Graco equipment from damage from inconsistent electrical power. ProGuard+ constantly monitors the supply voltage and disconnects the equipment from the power source to reduce the risk of damage to the equipment from excessive voltage fluctuations (high or low). It automatically resets after a one minute delay when acceptable power is available.
Az értékek megjelenítése metrikus mértékegységekben.
Az értékek megjelenítése USA-beli mértékegységekben.
| ProGuard+ | |
| Nominal voltage |
230VAC
50/60Hz
|
| Current Rating |
10Amps
10Amps
|
| High Voltage Disconnect |
280VAC
280VAC
|
| Low Voltage Disconnect |
170VAC
170VAC
|
| Reset Time |
60 seconds
60 seconds
|
| Weight |
0.9 lbs
400g
|
| Dimensions |
6.0 x 2.0 x 1.75 in.
150 x 50 x 45 mm
|
| Operating temperature range |
–30° to 115° F
–34° to 46° C
|
| Plug Configuration | |
| 24W755, power in (from power source) |
IEC-320-C14
IEC-320-C14
|
| 24W755, power out (to equipment) |
IEC-320-C13
IEC-320-C13
|
| 24W090, power in (from power source) |
CEE 7/7 Plug
CEE 7/7 Plug
|
| 24W090, power out (to equipment) |
CEE 7/7 Socket
CEE 7/7 Socket
|
| Replacement Danger and Warning labels, tags, and cards are available at no cost. | |