RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 616
Part Number: FFLP616
RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 616
Part Number: FFLP616
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 616 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 30-35 cm (12 to 14 in.) fan pattern and a 0.016 inch orifice. Reverse the SwitchTip to easily clear clogs.
Features
Product Brochure
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 616 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 30-35 cm (12 to 14 in.) fan pattern and a 0.016 inch orifice. Reverse the SwitchTip to easily clear clogs.
For fine finish applications
- Less Prep & Clean-up Time
- Less mess with less overspray
- Put the paint where you want it
- Easiest Pattern Overlap
- Softer spray fan pattern
- Easy to apply any material to any surface
- Consistent blended finish quality
- Extended Life
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- SmartTip Technology
- Exclusive internal tip geometry
- Reduces energy required to atomise paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Best Tip on the Market
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
- Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
Specifications & Documents
Technical Specifications
Convert to ImperialCompatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints |
---|---|
Fluid Orifice Size (in) | 0.016 |
For Use With | RAC X HandTite Tip Guard |
Material | Tungsten Carbide |
Maximum Fan Width (in) | 12 |
Maximum Flow Rate (GPM) | 0.27 |
Maximum Working Pressure (psi) | 4050 |
Minimum Fan Width (in) | 12 |
Model | RAC X |
Series | FF LP SwitchTip |
Spray Pattern | Fan |
Tip Type | Airless |
Type | Spray tip |
Compatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints |
Fluid Orifice Size (in) | 0.016 |
For Use With | RAC X HandTite Tip Guard |
Material | Tungsten Carbide |
Maximum Fan Width (cm) | 30 |
Maximum Fan Width (in) | 12 |
Maximum Fan Width (mm) | 356 |
Maximum Working Pressure (bar) | 280 |
Maximum Working Pressure (kPa) | 28000 |
Maximum Working Pressure (psi) | 4050 |
Minimum Fan Width (mm) | 305 |
Model | RAC X |
Pattern Size (mm) | 304.8 to 355.6 |
Series | FF LP SwitchTip |
Spray Pattern | Fan |
Tip Type | Airless |
Type | Spray tip |