Cart
P2 Standard
Probler P2 Gun Assembly with AA Mix Chamber Kit
Part Number: GCP2RA
P2 Standard
Probler P2 Gun Assembly with AA Mix Chamber Kit
Part Number: GCP2RA
The Probler P2 Gun is lightweight and easy to manoeuvre - even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to...
More InfoFeatures
Product Brochure
The Probler P2 Gun is lightweight and easy to manoeuvre - even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 1/4-18 |
|---|---|
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPSM |
| Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (in) | 7/16-18 |
| Component B Inlet Thread Type | UNF |
| Component Type | Plural-Component |
| Fluid orifice size (in) | 0.036 |
| Gun Activation | Manual |
| Gun Type | Air-Purge |
| Gun Weight (lb) | 3.9 |
| Gun Weight (oz) | 32.4 |
| Gun series | Standard |
| Maximum Air Inlet Pressure (MPa) | 0.76 |
| Maximum Air Inlet Pressure (psi) | 110 |
| Maximum Air Pressure (MPa) | 0.76 |
| Maximum Air Pressure (psi) | 110 |
| Maximum Flow Rate (lb/min) | 40 |
| Maximum Fluid Pressure (MPa) | 24.1 |
| Maximum Fluid Pressure (psi) | 3500 |
| Maximum Fluid Temperature (°F) | 200 |
| Maximum Fluid Working Pressure (MPa) | 22.1 |
| Maximum Fluid Working Pressure (psi) | 3200 |
| Minimum Air Inlet Pressure (MPa) | 0.62 |
| Minimum Air Inlet Pressure (psi) | 90 |
| Minimum Flow Rate (lb/min) | 3 |
| Mix chamber | AA (0.036) |
| Model | P2 |
| Overall Height (in) | 4.75 |
| Overall Length (in) | 3.125 |
| Overall Width (in) | 6.875 |
| Purge Method | Air |
| Series | Standard |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Flat |
| Type | Spray Accessory Kit |
| Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
| Air Inlet Size (cm) | 0.635 |
| Air Inlet Size (in) | 1/4-18 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPSM |
| Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
| Component A Inlet Size (cm) | 1.27 |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Size (mm) | 12.7 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (cm) | 1.11125 |
| Component B Inlet Size (in) | 7/16-18 |
| Component B Inlet Size (mm) | 11.1125 |
| Component B Inlet Thread Type | UNF |
| Component Type | Plural-Component |
| Fluid Orifice Size (cm) | 0.091 |
| Fluid Orifice Size (mm) | 0.91 |
| Fluid orifice size (in) | 0.036 |
| Gun Activation | Manual |
| Gun Type | Air-Purge |
| Gun Weight (g) | 1770 |
| Gun Weight (kg) | 1.77 |
| Gun Weight (oz) | 32.4 |
| Gun series | Standard |
| Maximum Air Inlet Pressure (MPa) | 0.76 |
| Maximum Air Inlet Pressure (bar) | 7.6 |
| Maximum Air Inlet Pressure (kPa) | 760 |
| Maximum Air Inlet Pressure (psi) | 110 |
| Maximum Air Pressure (MPa) | 0.76 |
| Maximum Air Pressure (bar) | 7.6 |
| Maximum Air Pressure (kPa) | 760 |
| Maximum Air Pressure (psi) | 110 |
| Maximum Flow Rate (kg/min) | 18 |
| Maximum Fluid Pressure (MPa) | 24.1 |
| Maximum Fluid Pressure (bar) | 241 |
| Maximum Fluid Pressure (kPa) | 24100 |
| Maximum Fluid Pressure (psi) | 3500 |
| Maximum Fluid Temperature (°C) | 93 |
| Maximum Fluid Working Pressure (MPa) | 22.1 |
| Maximum Fluid Working Pressure (bar) | 221 |
| Maximum Fluid Working Pressure (psi) | 3200 |
| Minimum Air Inlet Pressure (MPa) | 0.62 |
| Minimum Air Inlet Pressure (bar) | 6.2 |
| Minimum Air Inlet Pressure (kPa) | 620 |
| Minimum Air Inlet Pressure (psi) | 90 |
| Minimum Flow Rate (kg/min) | 1.4 |
| Mix chamber | AA (0.036) |
| Model | P2 |
| Overall Height (cm) | 12.1 |
| Overall Height (mm) | 121 |
| Overall Length (cm) | 7.9 |
| Overall Length (mm) | 79 |
| Overall Width (cm) | 17.4 |
| Overall Width (mm) | 174 |
| Pattern Size (mm) | 127 |
| Purge Method | Air |
| Series | Standard |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Flat |
| Type | Spray Accessory Kit |
| Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
