LSR
1:1 Ratio 200 litre (55 gal) F4-55 Fluid Automation System
Part Number: 24X169
![product image](/content/dam/pim/graco/aftd/afd/liquid-silicon-rubber-lsr-f4-55-left.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
LSR
1:1 Ratio 200 litre (55 gal) F4-55 Fluid Automation System
Part Number: 24X169
In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimise both with the Graco Fluid Automation F4-55.
Features
Product Brochure(English Only)
In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimise both with the Graco Fluid Automation F4-55.
Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.
Precise ratio control, minimal material waste
- The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
- The result: More precise mixing, a better end product and less wasted material.
Easier operation with Graco Control Architecture
- The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools
Better Colour Control
- Mix two additive streams at ratios ranging from 0.5 to 6%
Easy Set-up and Operation
- Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting
Maintains Material Integrity
- Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discolouration of material
Cleanroom Convenience
- A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance
(English Only)
Specifications & Documents
Technical Specifications
Convert to ImperialAir Inlet Size (in) | 1/2 |
---|---|
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Applicator Type | Automatic |
Frequency (Hz) | 50/60 |
Maximum Flow Rate (lb/min) | 5 |
Maximum Working Pressure (MPa) | 21 |
Maximum Working Pressure (psi) | 3000 |
Minimum Flow Rate (GPM) | 10 |
Model | LSR |
Type | Dispensing System |
Wetted Material | Cast Aluminium, Neoprene, Chrome, Stainless Steel, Tungsten Carbide, PTFE-Coated Nitrile, PTFE, UHMWPE, Buna-N, Fluoroelastomer, Acetal |
Air Inlet Size (in) | 1/2 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Applicator Type | Automatic |
Frequency (Hz) | 50/60 |
Maximum Flow Rate (kg/min) | 2.3 |
Maximum Working Pressure (MPa) | 21 |
Maximum Working Pressure (bar) | 207 |
Maximum Working Pressure (kPa) | 20700 |
Maximum Working Pressure (psi) | 3000 |
Model | LSR |
Type | Dispensing System |
Wetted Material | Cast Aluminium, Neoprene, Chrome, Stainless Steel, Tungsten Carbide, PTFE-Coated Nitrile, PTFE, UHMWPE, Buna-N, Fluoroelastomer, Acetal |