- Easy air-blast tip cleaning reduces build-up and tip clogging.
- Long-lasting side seals means less downtime for maintenance
- Quick-release fluid housing - lets you easily change the mix chambers without tools
- Hand-tightened front cap – no tools needed to clean and maintain seals and mix chamber
- Ergonomic handle
Fusion Air Purge Plural-Component Spray Gun
For high output spray polyurethane foam and polyurea applications
With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Εγχειρίδια
- 312571ZAM - Fusion Πιστόλι βαφής πολλαπλών εξαρτημάτων, εκκαθάρισης αέρα, μίγματος διασταυρούμενων ροών, Οδηγίες - Εξαρτήματα, Ελληνικά [άλλες γλώσσες]
- 199092U Fusion Air Purge Gun, EU-Declaration of Conformity (Μόνο Αγγλικά)
- 199125E, Fusion Mechanical Purge Solvent Purge Applicators, EU-Declaration of Conformity, English (Μόνο Αγγλικά)
Έντυπο υλικό
- 300615ENEU Reactor™ Spray Foam and Polyurea Equipment [άλλες γλώσσες]
- 349104ENEU Hoses, Guns and Accessories [άλλες γλώσσες]
- Case Study - Urethane foam insulation for spa manufacturing (Μόνο Αγγλικά)
- 348704A Case Study - Integrated proportioning system delivers fuel savings (English) (Μόνο Αγγλικά)
- 340669A Case Study - Epoxy resin for aluminum assembly (English) (Μόνο Αγγλικά)
- 349682EN, Fusion AP Gun Parts Kit (Μόνο Αγγλικά)
- 349867EN, Concrete Lifting Product Sell Sheet (Μόνο Αγγλικά)
- 349890EN, Spray Foam Equipment Brochure (Μόνο Αγγλικά)
Fusion Plural Component Impingement Mix Air Purge Spray Gun | |
Maximum Fluid Working Pressure |
3500 psi
245 bar, 24.5 MPa
|
Minimum Air Inlet Pressure |
80 psi
5.6 bar, 0.56 MPa
|
Maximum Air Inlet Pressure |
130 psi
9 bar, 0.9 MPa
|
Air Flow Range |
See chart in instruction manual.
See chart in instruction manual.
|
Typical Flow Rate of Round Pattern Guns |
See chart in instruction manual.
See chart in instruction manual.
|
Typical Flow Rate of Flat Pattern Guns |
See chart in instruction manual.
See chart in instruction manual.
|
Maximum Fluid Temperature |
200°F
94°C
|
Air Inlet Size |
1/4 npt Quick Disconnect Nipple
1/4 npt Quick Disconnect Nipple
|
A Component (ISO) Inlet Size |
-5 JIC; 1/2-20 UNF
-5 JIC; 1/2-20 UNF
|
B Component (Resin) Inlet Size |
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
|
Sound Pressure |
81.1 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
81.1 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
|
Sound Power, measured per ISO 9416–2 |
91.0 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
91.0 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
|
Dimensions |
7.5 x 8.1 x 3.3 in
191 x 206 x 84 mm
|
Weight |
2.5 lb
1.1 kg
|
Wetted Parts |
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings
|
Παρελκόμενα
-
Fusion CS
For high output spray polyurethane foam and polyurea applications
-
Fusion Mechanical Purge
For high output spray polyurethane foam and polyurea applications
-
Graco InSite
Sends Reactor data to your smart phone, tablet or computer.
-
Probler P2
For high output spray polyurethane foam and polyurea applications
-
Reactor Heated Hose
For Reactor proportioners
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Twistork Agitators
For mixing fluids in closed drums
-
Xtreme-Duty Hose
For high-pressure spraying applications
Σχετικά προϊόντα
-
Reactor 2 E-30i
Turnkey system for spray foam insulation and coating - applies up to 30 lb (13.6 kg) per minute
-
Reactor 2 E-XP2i
Turnkey system for polyurea waterproof coating and lining - applies up to 2 gal (7.6 liters) per minute
-
Reactor A-25
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
-
Reactor E-10
For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute
-
Reactor E-10hp
Entry-level system for pure and hybrid polyurea coatings
-
Reactor E-20
For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute
-
Reactor E-XP1
For polyurea coatings - applies up to 2 gal (7.6 liters) per minute
-
Reactor H-25, H-40 and H-50
For medium to high-output foam applications and roofing projects - applies up to 52 lb (23...
-
Reactor H-XP2 and H-XP3
For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute