Warm Melt Supply Systems Bulk Melt Unloader
Bulk unloader for warm melt materials and temperature conditioning applications
Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. Ideal for temperature conditioning applications. An excellent alternative to water-jacketed solutions.
- Bridges the gap between hot melt and ambient supply systems
- Modular approach provides easy snap-on installation and eliminates complex point-to-point wiring
- Intuitive, easy-to-use interface
- Configurable to fit your unique application and material
Vadovai
Literatūra
Warm Melt Supply Systems | |
Maximum Air Input Pressure | |
D60 |
150 psi
10 bar, 1 MPa
|
D200 |
150 psi
10 bar, 1 MPa
|
D200s |
125 psi
9 bar, 0.9 MPa
|
Platen Wetted Parts (By Platen Code and Part Number) | |
F: 257729, 5 gal (20 l) |
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
|
L: 257734, 8 gal (30 l) | |
U: 257738, 16 gal (60 l) | |
H: 257731, 5 gal (20 l) |
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
|
R: 257736, 8 gal (30 l) | |
Y: 257741, 16 gal (60 l) | |
8: 255662, 55 gal (200 l) |
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
|
9: 255663, 55 gal (200 L) |
EPDM, aluminum, zinc-plated carbon steel, 316 sst
EPDM, aluminum, zinc-plated carbon steel, 316 sst
|
Displacement Pump |
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
|
Maximum Operating Temperature (Supply System) |
158°F
70°C
|
Sound Data |
See NXT Air Motor
See NXT Air Motor
|
External Power Supply Requirements | |
AC Power Units |
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current
|
-
Didelės klampos medžiagos transportavimas
Pramoninių talpyklų išsiurbimo siurbliai visoms tekančioms medžiagoms
-
Urminio tiekimo sistema
Išsiurbkite vidutinės ir didelės klampos produktus iš 55 galonų (208 l) ir 300 galonų (1135,6 ...
-
Vidutinės klampos medžiagos transportavimas
Įvairiausi siurbliai bet kokioms tekančioms medžiagoms sanitariniuose ir p...
-
Prepreg Supply
Equipment to deliver mixed resin into fibers
-
Resin Batch Blending
Equipment for proportioning resins and hot melt resin dispensing