Graco Inc.

Husky 716 Air-Operated Double Diaphragm Pump

3/4 inch Positive Displacement Double Diaphragm Pump

AODD pumps with 3/4 inch (19.05 mm) connection available in aluminum and SST

Where to BuyRequest Info

Our Husky 3/4-inch pneumatic double diaphragm pumps have an external controller for remote control capabilities and are available in aluminum and 316 stainless steel construction.

  • 3/4 in (19.05 mm) center- and end-porting
  • No seals to leak or fail
  • Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks

Husky 716 Air-Operated Diaphragm Pumps
Maximum Fluid Working Pressure
100 psi
7 bar, 0.7 MPa
Air Pressure Operating Range
30 to 100 psi
2.1 to 7 bar, 0.2 to 0.7 MPa
Maximum air consumption
28 scfm
3
Maximum free-flow delivery
16 gpm
61 lpm
Maximum pump speed
400 cpm
400 cpm
Gallons (Liters) per cycle
0.04
0.15
Maximum suction lift (water with buna balls)
15 ft dry, 25 ft wet
4.5 m dry, 7.6 m wet
Maximum size pumpable solids
3/32 in
2.5 mm
Operating Temperature Range*
Minimum, all pumps
40°F
4°C
Maximum, acetal pumps
180°F
82°C
Maximum, polypropylene pumps
150°F
66°C
Maximum, aluminum, stainless steel, PVDF pumps
225°F
107°C
Sound power level (measured per ISO standard 9614–2)
At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute
77 dB(A)
77 dB(A)
At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute
95 dB(A)
95 dB(A)
Sound pressure level (measured 1 m from pump)
At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute
67 dB(A)
67 dB(A)
At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute
85 dB(A)
85 dB(A)
Inlet/Outlet Sizes
Air inlet size
1/4 npt(f)
1/4 npt(f)
Air exhaust port size
3/8 npt(f)
3/8 npt(f)
Fluid inlet size
3/4 npt(f), bspt(f), or bspp(f)
3/4 npt(f), bspt(f), or bspp(f)
Fluid outlet size
3/4 npt(f), bspt(f), or bspp(f)
3/4 npt(f), bspt(f), or bspp(f)
Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump)
Aluminum pumps
aluminum, stainless steel, PTFE, zinc-plated steel
aluminum, stainless steel, PTFE, zinc-plated steel
Stainless steel pumps
316 stainless steel, PTFE
316 stainless steel, PTFE
Non-wetted external parts
All pumps
polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet)
polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet)
Weight
Aluminum pumps
8.5 lb
3.9 kg
Stainless steel pumps
18 lb
8.2 kg
Santoprene® is a registered trademark of the Monsanto Company.