E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp
Part Number: EC3440
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/EFloDC_S4B_1201.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/21942.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
Image is for illustrative purposes only.
Image is for illustrative purposes only.
E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp
Part Number: EC3440
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar sized pneumatic pumps – lowering your energy bill and saving you money
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar sized pneumatic pumps – lowering your energy bill and saving you money
- Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalysed coatings
- Minimal pulsation at changeover provides a more consistent finish
- Electric motor eliminates icing – giving you smoother pump operation and better finished product
- Quiet electric motor improves your work environment allowing you to remain near the pump for longer periods of time
Specifications & Documents
Technical Specifications
Convert to ImperialApplication | Circulation |
---|---|
Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Outlet Size (in) | 1-1/2 |
Fluid Section Type | Sealed |
Input Voltage (V AC) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (cpm) | 20 |
Maximum Flow Rate (gpm) | 8 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 2.1 |
Maximum Working Pressure (psi) | 300 |
Minimum Operating Temperature (°F) | 32 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 2 |
Series | DC 4-Ball |
Type | Electric Piston Pump |
Wetted Material | Stainless Steel |
Application | Circulation |
Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Outlet Size (in) | 1-1/2 |
Fluid Outlet Size (mm) | 38.1 |
Fluid Section Type | Sealed |
Input Voltage (V AC) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (cpm) | 20 |
Maximum Flow Rate (l/min) | 30.28 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 2.1 |
Maximum Working Pressure (bar) | 20.7 |
Maximum Working Pressure (kPa) | 2070 |
Maximum Working Pressure (psi) | 300 |
Minimum Operating Temperature (°C) | 0 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Series | DC 4-Ball |
Type | Electric Piston Pump |
Wetted Material | Stainless Steel |
Repair Parts
Part No. | Description |
---|---|
26A397 | KIT,ROTOR, E-FLO DC |
26A442 | KIT,BEARING, E-FLO DC |
24W920 | KIT, ADAPTER, CABLE HALL SWITCH |
24U938 | KIT,ENCODER |
16U113 | KIT,REPLACEMENT,KNOB |
26A539 | COVER,FAN |
26A398 | KIT,GEAR, E-FLO DC |
26A401 | KIT,GEAR FOR E-FLO DC |
26A395 | KIT,FAN, COMPLETE |
26A399 | KIT,RACK, E-FLO DC |
26A396 | KIT,FAN, ONLY |
26A537 | KIT,BOLT |
16J463 | COUPLER,FAN DRIVE |
24R050 | KIT,PRESSURE,SENSOR |