Reactor A-XP1

Reactor A-XP1 Proportioner Package, Fusion AP Gun, Wheels, DataTrak, 230/400 V

APY165

Reactor A-XP1

Reactor A-XP1 Proportioner Package, Fusion AP Gun, Wheels, DataTrak, 230/400 V

APY165

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.

For polyurea coatings – applies up to 5.7 L (1.5 gal) per minute.

  • Maintains temperature setpoints for better yield
  • Maintains consistent output pressure for uniform spray pattern
  • Easy to operate and maintain
  • Best choice for affordability and durability
  • Three Heat Zones

    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Three Heat Zones

    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Recirculation Manifold

    • A quick, easy way to balance system pressures
  • NXT Air Motor

    • Low air consumption for increased efficiency
    • Muffler provides low operating noise levels
    • Air valve provides smooth and rapid changeover
  • ISO Pump Lube System

    • Prevents isocyanate crystallisation on the pump seal and shaft
  • Hybrid Heater

    • Provides better temperature control

Specifications & Documents

Technical Specifications

Convert to Imperial
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Amperage (A) 26 @ 380 V ac (3-Phase WYE), 45 @ 230 V ac (3-Phase Delta), 56 @ 230 V ac (1-Phase)
Application Protective Coatings
Applicator Type Manual
Compatible Material Plural Components
Component A Inlet Size (in) 3/4
Component A Thread Gender Female
Component A Thread Type NPT
Component B Inlet Size (in) 3/4
Component B Thread Gender Female
Component B Thread Type NPT
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Fusion AP
Hose Length (ft) 50, 10
Includes Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak
Material Application Polyurea
Maximum Air Consumption (SCFM) 32 scfm at 2000 psi
Maximum Air Inlet Pressure (psi) 125
Maximum Flow Rate (GPM) 1.5
Maximum Flow Rate (lb/min) 25
Maximum Fluid Temperature (°F) 190
Maximum Fluid Viscosity (cP) 1500
Maximum Mix Ratio 1:1
Minimum Fluid Viscosity (cP) 250
Overall Depth (in) 30
Overall Height (in) 43.5
Overall Width (in) 29
Phase 1, 3
Power Rating (HP) 17.43
Power Rating (W) 13000
Power Rating (kW) 13
Power Source Air
Pressure Type High Pressure
Product Type Plural Component
Sound Power Level (dB(A)) 80.1
Sound Pressure Level (dB(A)) 70.2
Type Proportioning Package
Weight (lb) 310
Wetted Material Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon
5680
Air Inlet Size (cm) 1.27
Air Inlet Size (mm) 12.7
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Amperage (A) 26 @ 380 V ac (3-Phase WYE), 45 @ 230 V ac (3-Phase Delta), 56 @ 230 V ac (1-Phase)
Application Protective Coatings
Applicator Type Manual
Compatible Material Plural Components
Component A Inlet Size (mm) 19.05
Component A Thread Gender Female
Component A Thread Type NPT
Component B Inlet Size (mm) 19.05
Component B Thread Gender Female
Component B Thread Type NPT
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Fusion AP
Hose Length (m) 15, 3
Includes Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak
Material Application Polyurea
Maximum Air Inlet Pressure (bar) 8.62
Maximum Air Inlet Pressure (kPa) 862
Maximum Flow Rate (L/min) 5.68
Maximum Flow Rate (kg/min) 11.4
Maximum Fluid Temperature (°C) 88
Maximum Fluid Viscosity (cP) 1500
Maximum Mix Ratio 1:1
Minimum Fluid Viscosity (cP) 250
Overall Depth (cm) 76.2
Overall Depth (mm) 762
Overall Height (cm) 110.5
Overall Height (mm) 1105
Overall Width (cm) 73.7
Overall Width (mm) 737
Phase 1, 3
Power Rating (HP) 17.43
Power Rating (W) 13000
Power Rating (kW) 13
Power Source Air
Pressure Type High Pressure
Product Type Plural Component
Sound Power Level (dB(A)) 80.1
Sound Pressure Level (dB(A)) 70.2
Type Proportioning Package
Weight (kg) 140.6
Wetted Material Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco