Reactor E-10

Reactor E-10 Proportioner Package, Probler P2 Gun, 120 V, 1PH

P29570

Reactor E-10

Reactor E-10 Proportioner Package, Probler P2 Gun, 120 V, 1PH

P29570

Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, ...

More Info
Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 5.4 kg (12 lb) per minute.

  • Small size is ideal for on-site portability and hard-to-reach areas
  • One-person operation saves time and money
  • Use as an add-on to your existing spray business
  • Versatile - switch from cold spray to hot spray to foam
  • Saves 30% on material costs compared to disposable foam systems
  • Small ready-to-use systems with big results!

    • Electric power is low draw and plugs into standard outlets
    • Intuitive start, stop and digital temperature display
    • Pressure balance valves give you quick and easy balancing of system pressures
    • Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
    • Easy-to-service fluid section reduces maintenance and increases productivity
    • Electric motor improves performance and reduces operating costs
    • Heaters and hose give you up to 2000 watts to pre-heat circulating material
  • Intuitive start, stop and digital temperature display with single knob operation
  • Pressure balance valves give you quick and easy balancing of system pressures
  • Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
  • Easy-to-service fluid section reduces maintenance and increases productivity

Specifications & Documents

Technical Specifications

Convert to Imperial
Air Inlet Size (in) 1/4
Air Inlet Thread Type Quick-Disconnect Pin
Air Outlet Size (in) 1/4
Air Outlet Thread Type NPSM
Application Spray Foam
Applicator Type Manual
Compatible Material Plural Components
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Probler P2
Hose Length (ft) 35
Includes Proportioner, Probler P2 Gun, Heated Hose
Material Application Polyurethane Foam
Maximum Flow Rate (lb/min) 12
Maximum Fluid Temperature (°F) 160
Maximum Mix Ratio 1:1
Maximum Working Pressure (psi) 2000
Overall Depth (in) 30
Overall Height (in) 44
Overall Width (in) 26.5
Phase 1
Power Rating (HP) 4.69
Power Rating (W) 3500
Power Rating (kW) 3.5
Power Source Electric
Pressure Type Low Pressure
Product Type Plural Component
Sound Pressure Level (dB(A)) 84.5
Tank Capacity (gal) 7
Type Proportioning Package
Weight (lb) 160
Wetted Material Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE
Air Inlet Size (cm) 0.635
Air Inlet Size (mm) 6.35
Air Inlet Thread Type Quick-Disconnect Pin
Air Outlet Size (cm) 0.635
Air Outlet Size (mm) 6.35
Air Outlet Thread Type NPSM
Application Spray Foam
Applicator Type Manual
Compatible Material Plural Components
Component Type Two Component
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Probler P2
Hose Length (m) 10.7
Includes Proportioner, Probler P2 Gun, Heated Hose
Material Application Polyurethane Foam
Maximum Flow Rate (kg/min) 5.44
Maximum Fluid Temperature (°C) 71
Maximum Mix Ratio 1:1
Maximum Working Pressure (bar) 140
Maximum Working Pressure (kPa) 1400
Overall Depth (cm) 76.2
Overall Depth (mm) 762
Overall Height (cm) 111.8
Overall Height (mm) 1118
Overall Width (cm) 67.3
Overall Width (mm) 673
Phase 1
Power Rating (HP) 4.69
Power Rating (W) 3500
Power Rating (kW) 3.5
Power Source Electric
Pressure Type Low Pressure
Product Type Plural Component
Sound Pressure Level (dB(A)) 84.5
Tank Capacity (L) 26.5
Type Proportioning Package
Weight (kg) 7.2640
Wetted Material Aluminum, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco