Graco Inc.

Dosadores ProMix 2KE  Dosadores compactos, com componente múltiplo de entrada de nível

Dosador compacto, de entrada de nível disponível nas versão de medidor e bomba para todas as tecnologias de pulverizadores

Onde comprarSolicitar informações
Share |

Disponível nas versões de medidor e bomba para todas as tecnologias de pulverização, o ProMix 2KE torna o acabamento com vários componentes FÁCIL. Desenvolvido para aplicações com várias cores, dois componentes e interiores.


Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts. 

19926
  • Desenvolvido para aplicações de múltiplas cores, dois componentes e interiores
  • Escolha entre os sistemas de componentes múltiplos com base em bombas ou medidor
  • Esteja dentro da proporção dos limites de tolerância predefinidos, abaixo de ±1% com a versão de medidor e ±2% com a versão de bomba.
  • Materiais fora da proporção não alcançarão o seu produto, eliminando a necessidade custosa de refazer o trabalho
  • Válvulas de fluidos no estilo cartucho fáceis de fazer manutenção
  • capacidade de programar lembretes de manutenção
ProMix 2KE Plural Component Proportioner LCD Display

Tela LCD

  • Alcança até 3 metros (10 ft.) com o cabo padrão
  • Funções de simples operação: espera, pulverização, purga e lavagem
  • Exibi relações misturadas, vida(s) útil(eis) dos recipientes e a taxa de fluxo do material
  • Fácil de alterar as cores nas unidades de metro
  • Tela de utilização de material para o acompanhamento de custos e a criação de relatórios ambientais
  • Lembretes de manutenção ajustáveis: ciclos de bomba, ciclos de válvula e dias de filtro

Manuais

Bibliografia

Outros recursos

Ver valores em unidades métricas. Ver valores em unidades dos Estados Unidos.

ProMix 2KE Meter-Based System
Maximum fluid working pressure
3000 psi
275.8 bar, 27.58 MPa
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30.0:1
0.1:1–30.0:1
On-ratio accuracy
up to +/- 1%, user selectable
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
Fluid inlet sizes
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
200 lb
91 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix 2KE
Maximum fluid working pressure
See Manual 3A0868.
See Manual 3A0868.
Maximum working air pressure
100 psi
0.7 MPa, 7 bar
Air supply
75 to 100 psi
0.5 to 0.7 MPa, 5.2 to 7 bar
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1 to 30:1
0.1:1 to 30:1
Viscosity range of fluid
20 to 5000 cps
20 to 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Operating temperature range
41° to 122°F
5° to 50°C
Approximate weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Fluids handled
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
On-ratio accuracy
1:1 to 10:1 Mixing Ratio
± 2%
± 2%
10.1:1 to 30:1 Mixing Ratio
± 5%
± 5%
Noise level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
Below 85 dBA
Below 85 dBA
Materials of construction
Wetted materials on all models
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE

ProMix 2KE Pump-Based System
Maximum fluid working pressure
See the ProMix 2KE manual.
See the ProMix 2KE manual.
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30:1
0.1:1–30:1
On-ratio accuracy
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix® 2KE
Maximum fluid working pressure
See Hazardous Location Models in manual 3A0870
See Hazardous Location Models in manual 3A0870
Maximum working air pressure
100 psi
7 bar , 0.7 MPa
Air supply
75 - 100 psi
5.2 - 7 bar, 0.5 - 0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1- 30:1
0.1:1- 30:1
On-ratio accuracy
up to ±1%, user selectable
up to ±1%, user selectable
Fluids handled
one or two component:
solvent and waterborne paints
solvent and waterborne paints
polyurethanes
epoxies
acid catalyzed varnishes
moisture sensitive isocyanates
Viscosity range of fluid
20- 5000 cps
20- 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid flow rate range
G3000, G250 Meter
0.02-1.00 gal/min
75 - 3800 cc/min.
G3000HR, G250HR Meter
0.01-0.50 gal/min
38 - 1900 cc/min.
Coriolis Meter
0.005-1.00 gal/min
20 - 3800 cc/min.
S3000 Solvent Meter (accessory)
0.01-0.50 gal/min
38 - 1900 cc/min.
Fluid inlet sizes
Flow Meter
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapters
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External Power Supply Requirements
85 15 amp maximum circuit breaker required-
85 15 amp maximum circuit breaker required-
250 Vac, 50/60 Hz, 2 amps maximum draw
250 Vac, 50/60 Hz, 2 amps maximum draw
8 to 14 AWG power supply wire gauge
Operating temperature range
41- 122° F
5-50° C
Approximate Weight
Meter Systems
200 lb
91 kg
Pump Systems
300 lb
136 kg
Environmental Conditions Rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA
Wetted parts
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE