Graco Inc.

Endura-Flo 4D150  High Pressure Diaphragm Pumps

150 cc per cycle and 400 psi (28 bar) maximum fluid pressure in a small, compact pump

Where to BuyRequest Info

The Endura-Flo 4D150 ensures long-lasting durability and can withstand runaway conditions better than other diaphragm pumps. This easy-to-install pump offers low pulsation output and smooth changeover for quick color changes, saving you time and money. Plus it has the highest pressure ratio in the industry at 4:1. 

  • 150 cc per cycle
  • Redesigned diaphragm lasts longer and can hold up to extreme operating conditions better
  • Easy access to critical components provides fast online maintenance
  • Superior durability for abrasive materials
  • Innovative design ensures easy access to critical components for fast, online repair
  • Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems
  • DataTrak option prevents runaway and tracks material usage
  • Pumps are easily configurable for custom installations

 

Endura-Flo 4D150 Diaphragm Pump
Maximum air input pressure
100 psi
7 bar, 0.7 MPa
Maximum fluid working pressure
400 psi
28 bar, 2.8 MPa
Maximum static fluid pressure
430 psi
30 bar, 3.0 MPa
Ratio
4:1
4:1
Maximum recommended continuous cycle rate
20 cycles per minute
20 cycles per minute
Volume per cycle (double stroke)
5 oz per cycle
150 cc per cycle
Ambient and operating temperature range. Use dry compressed air when operating at low temperatures.
32 to 122°F
0 to 50°C
Dry suction lift
23 ft
7.0 m
Wet suction lift
29 ft
8.8 m
Air inlet size
1/4 npt
1/4 npt
Fluid inlet size
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp
Fluid outlet size
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp
Weight (approximate)
31 lb
14 kg
Wetted parts
stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)
stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)
Average Sound Pressure Levels in dBA at 20 cpm [measured at 1 meter (3.28 ft) horizontal, 1.5 meter (4.9 ft) above the equipment]
At 70 psi (0.5 MPa, 5.0 bar)
62.3 dBA
62.3 dBA
At 100 psi (0.7 MPa, 7.0 bar)
62.9 dBA
62.9 dBA
Sound Power measured per ISO 9614–2.
At 70 psi (0.5 MPa, 5.0 bar)
70.8 dBA
70.8 dBA
At 100 psi (0.7 MPa, 7.0 bar)
71.6 dBA
71.6 dBA