- Manual and automatic configurations
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Single- or multi-color and catalysts
- Accurate ratio assurance for superior finish quality
- Simple programming allows fast set up and efficient process control
- Advanced web interface provides consolidated system management and reporting
ProMix 2KS Proportioners Electronic Plural Component Proportioning Systems
Electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials
Graco's two- and three-component proportioners offer precise and reliable electronic plural component proportioners for a broad range of solventborne, waterborne, and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS and 3KS systems provide flexibility and increased efficiency.
- Offers the highest degree of ratio assurance
- Provides critical process variable feedback
- Built in system safeguards
- Effective color change solution
- Efficient material tracking and reporting
Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.

Příručky
- 312775K, ProMix 2KS, Installation Manual for Manual Systems, English [další jazyky]
- 312776L, Manual, ProMix 2KS Manual Systems, Operation, English [další jazyky]
- 312777H - ProMix 2KS Plural Component Proportioner, Repair-Parts Manual, English [další jazyky]
- 312778G - ProMix 2KS, Installation Manual for Automatic Systems, English [další jazyky]
- 312779K, ProMix 2KS Automatic Systems, Operation, English [další jazyky]
- 312780M, Manual, ProMix 2KS Plural Component Proportioner, Repair and Parts, English [další jazyky]
- 312781H, Manual, Fluid Mix Manifold Instructions-Parts, English [další jazyky]
- 312784H, Manual, Gun Flush Box Kit, Instructions-Parts, English [další jazyky]
- 312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English [další jazyky]
- 312787H, Manual, Color Change Module Kits, Instructions and Parts, English [další jazyky]
- 406719B, 15T632 Air Flow Switch Kit, Instructions, English (Pouze anglicky)
- 406715C, Instruction Form for Injection Kit 15U955, English [další jazyky]
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (Pouze anglicky)
- 406804C, Instruction Form for Integrator Kit 24B618 (100cc) English (Pouze anglicky)
- 406713B, Dispense Valve Acid Kit, Instructions-Parts, English [další jazyky]
- 406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English [další jazyky]
- 312782J, Air Actuated Dispense Valve Instruction-Parts Manual, English [další jazyky]
- 312783F, Manual, Color and Catalyst Change Valves, Instructions-Parts, English [další jazyky]
- 312785D, Network Communication Kits Instruction-Parts Manual, English [další jazyky]
- 313290A - 15V950 Floor Stand, English [další jazyky]
- 313212B, Manual, 15V534 Gun Flush Box Interface Kit Instructions, English [další jazyky]
- 313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English [další jazyky]
- 199266S, ProMix 1KS, 2KS, 3KS, and Accessories, EU-Declaration of Conformity (Pouze anglicky)
- 199304J, ProMix 2KS EasyKey Interface, EU-Declaration of Conformity (Pouze anglicky)
- 199310D, Module, Gateway Communication & AWI, ProMix 2KS and 3KS , Informer Power Supply, 318-162 EC-Declaration of Conformity (European Community) English (Pouze anglicky)
312775K, ProMix 2KS, Installation Manual for Manual Systems, English
312776L, Manual, ProMix 2KS Manual Systems, Operation, English
312777H - ProMix 2KS Plural Component Proportioner, Repair-Parts Manual, English
312778G - ProMix 2KS, Installation Manual for Automatic Systems, English
312779K, ProMix 2KS Automatic Systems, Operation, English
312780M, Manual, ProMix 2KS Plural Component Proportioner, Repair and Parts, English
312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English
312787H, Manual, Color Change Module Kits, Instructions and Parts, English
406715C, Instruction Form for Injection Kit 15U955, English
406713B, Dispense Valve Acid Kit, Instructions-Parts, English
406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English
312785D, Network Communication Kits Instruction-Parts Manual, English
313290A - 15V950 Floor Stand, English
313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English
Dokumenty
- 339996CS ProMix™ 2KS Elektronický systém dávkování dvousložkových materiálů [další jazyky]
- 344807CS , ProMix™ 3KS [další jazyky]
- 345099EN-F Acid Catalyst for ProMix Proportioners (Pouze anglicky)
- 345101EN Finishing Automation Equipment Overview [další jazyky]
- 344880ENEU ProControl™ 1KS [další jazyky]
- 2KS Waterborne Urethane (Pouze anglicky)
- 3KS CARC Application (Pouze anglicky)
- Viscosity Control with ProMix 3KS (Pouze anglicky)
339996CS ProMix™ 2KS Elektronický systém dávkování dvousložkových materiálů
344807CS , ProMix™ 3KS
345101EN Finishing Automation Equipment Overview
Další zdroje
- ProMix 2KS FAQ's
- ProMix 2KS/3KS Software Updates
- CAD Drawing (2D) - ProMix 2KS - .zip (Pouze anglicky)
- CAD Drawing (3D) - ProMix 2KS - .zip (Pouze anglicky)
- CAD Drawing (2D) - 15V950 - Floor Stand - .zip (Pouze anglicky)
- CAD Drawing (3D) - 15V950 Floor Stand - .zip (Pouze anglicky)
- CAD Drawing (2D) - 249849 - .zip (Pouze anglicky)
- ProMix Selector
- ProMix ROI
ProMix 2KS Manual System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
0.1:1–50:1
0.1:1–50:1
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
4000 psi
280 bar, 28 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
ProMix 2KS Automatic System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
0.1:1–50:1
0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
4000 psi
275.8 bar, 27.58 MPa
|
Low pressure color change |
300 psi
20.6 bar, 2.07 MPa
|
Coriolis Meter |
2300 psi
158.6 bar, 15.86 MPa
|
RoboMix system |
190 psi
13.1 bar, 1.31 MPa
|
Flow control |
190 psi
13.1 bar, 1.31 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
-
Barvy, mořidla a laky pro profesionální i domácí použití
-
Pryskyřice
-
Polymery
-
Materiály na vodní bázi
-
Materiály na bázi rozpouštědel
-
Materiály s vysokým obsahem pevných částic
-
Vícesložkové materiály
-
Nátěry odolné vůči chemikáliím
-
Metalické materiály
-
Mořidla
-
Fermeže
-
Laky
-
Kyselé katalyzátory
-
Smalty
-
Epoxidy
-
Rychleschnoucí materiály
-
UV nátěry
-
Zemědělské stroje – výroba
-
Přípravna barev
-
Stříkací kabiny
-
Stavební stroje – výroba
-
Nátěry odolné vůči chemikáliím
-
Automobilová elektronika
-
Spotřební elektronika
-
Výroba elektroniky
-
Výroba a povrchová úprava nábytku
-
Výroba a všeobecná povrchová úprava kovů
-
Dřevovýroba
-
Architektonické úpravy a tvarování
-
Železnice
-
Kamionová doprava
-
Flotily
-
Zpracování odpadu – výroba zařízení
-
Osobní karavany
-
Karavany
-
Letectví a kosmonautika – povrchová úprava
-
Dřevo a dřevěné produkty – dávkovače
-
Výroba těžkých strojů
-
Lesnická technika
Příslušenství
Související produkty
-
Informer
Monitor fluid rates, reduce material waste & improve spray performance. Ideal for solvent tracking & other fi...
-
ProMix 2KE Proportioners
Compact, entry-level proportioner available in pump and metered versions for all spray techno...
-
ProMix 3KS Proportioners
Purchase with a ProMix 2KS system or upgrade an existing 2KS system
-
ProMix PD2K Proportioners
100% Positive Displacement Technology for accurate mix ratios and consistent performance